Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green circuit board with black memory chips and gold contacts

A-Tech

A-Tech 8GB DDR3 1600MHz ECC RDIMM 2Rx4 Server Memory

SKU CH-V18N-ZS3FG

8GB DDR3 1600MHz ECC registered DIMM with CL11 latency and 1.5V operation for server memory upgrades

  • Capacity8GB
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection guards data integrity with registered DDR3 1600MHz operation
  • 8GB capacity extends server multitasking headroom on a single 240-pin module
  • CL11 latency at 1.50V standard voltage delivers stable registered performance
  • 2Rx4 organisation optimises rank density for compatible Samsung DDR3 platforms
  • Quality-tested major-brand chips ensure dependable operation in server workloads

8GB DDR3 ECC RDIMM for servers

This 8GB DDR3 1600MHz ECC registered DIMM is built for server and workstation platforms that require error-correcting memory. The 2Rx4 organisation and CL11 latency suit multi-socket boards with registered memory controllers. It replaces several Samsung M392 and M393 part numbers in existing deployments.

Sustained workload behaviour

Registered buffering reduces electrical load on the memory bus, allowing stable operation when all slots are populated under continuous demand. ECC circuitry detects and corrects single-bit errors without halting the system. Standard 1.50V DDR3 voltage keeps power draw predictable during extended compute tasks.

240-pin DDR3 form factor decides fit

The module uses the 240-pin DDR3 DIMM keying, so it only fits slots wired for DDR3 registered memory. Boards that accept only unbuffered UDIMMs or a different DDR generation will not accept this part. Verify the platform manual lists RDIMM support before ordering.

Kohokohdat

  • ECC protection guards data integrity with registered DDR3 1600MHz operation
  • 8GB capacity extends server multitasking headroom on a single 240-pin module
  • CL11 latency at 1.50V standard voltage delivers stable registered performance
  • 2Rx4 organisation optimises rank density for compatible Samsung DDR3 platforms
  • Quality-tested major-brand chips ensure dependable operation in server workloads

Tekniset tiedot

BrandA-Tech
Capacity8GB
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Kysymyksiä tästä tuotteesta

Will this 1.50V DDR3 1600MHz ECC RDIMM run hotter or louder than lower-voltage modules when operating continuously?

The module operates at standard DDR3 1.50V with CL11 latency. Registered ECC DIMMs add minimal electrical load, and thermal output is comparable to other 8GB DDR3 server sticks under sustained workloads.

Does my motherboard need to support registered ECC memory and 240-pin DDR3 DIMM slots to use this 8GB stick?

Yes. This is a 240-pin DDR3 ECC RDIMM (Registered) requiring a server or workstation board that explicitly supports registered ECC memory and DDR3 1600MHz operation.

Can I install this 2Rx4 PC3-12800 module alongside existing Samsung M393B1K70DH0-CK0 sticks in the same system?

This module is listed as a compatible equivalent for the Samsung M393B1K70DH0-CK0 and shares the same 2Rx4 organisation, 1600MHz speed, and 1.5V voltage, so it will interleave correctly when populated per the motherboard's memory-configuration rules.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.