Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green 240-pin DDR3 DIMM with black chips and silver heatspreader

A-Tech

A-Tech 8GB DDR3 1600MHz ECC RDIMM 2Rx4 server RAM

SKU CH-4EJV-EAS6Q

8GB DDR3 1600MHz ECC RDIMM 2Rx4 server memory compatible with Dell A5681559, A5681561, A5816804, A5816812, A5816819 and SNPRYK18C/8G

  • Capacity8GB
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 8GB capacity expands server memory headroom for heavier workloads
  • DDR3 1600MHz PC3-12800 speed accelerates data throughput
  • ECC RDIMM with 2Rx4 rank detects and corrects memory errors
  • Registered 240-pin DIMM at 1.50V ensures stable signal integrity
  • Tested compatible replacement for Dell part numbers 5681559 5681561 5816804 5816812 5816819

8GB DDR3 1600MHz ECC RDIMM

This 8GB DDR3 1600MHz ECC registered DIMM is built for server and workstation systems that require registered memory with error correction. It operates at 1.5V with CL11 latency and uses a 2Rx4 rank configuration on a 240-pin module.

Suits Dell part-number match

This module replaces Dell part numbers A5681559, A5681561, A5816804, A5816812, A5816819 and SNPRYK18C/8G, making it a direct fit for compatible Dell servers and workstations. Builders whose systems need unbuffered UDIMMs, non-ECC memory, or a different DDR generation should select another module.

Registered ECC DDR3 1600MHz requirement

The system must support DDR3 1600MHz registered ECC RDIMM memory at 1.5V; if the platform requires unbuffered, non-ECC, or a different speed, this module will not function.

Kohokohdat

  • 8GB capacity expands server memory headroom for heavier workloads
  • DDR3 1600MHz PC3-12800 speed accelerates data throughput
  • ECC RDIMM with 2Rx4 rank detects and corrects memory errors
  • Registered 240-pin DIMM at 1.50V ensures stable signal integrity
  • Tested compatible replacement for Dell part numbers 5681559 5681561 5816804 5816812 5816819

Tekniset tiedot

BrandA-Tech
Capacity8GB
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Kysymyksiä tästä tuotteesta

What does the DDR3 1600 PC3-12800 interface mean for real-world throughput?

The module runs at 1600 MHz with a PC3-12800 rating, so its peak transfer rate is 12800 MB/s. Actual throughput depends on the server's memory controller and channel configuration.

What physical slot and clearance does this 240-pin DDR3 RDIMM require?

It needs a standard 240-pin DDR3 DIMM slot. The registered design adds a register chip on the PCB, so verify the motherboard supports registered memory and that heatsink clearance is adequate.

What is the correct installation sequence for this registered ECC module, and what step is often missed?

Power down, open the chassis, align the notch with the 240-pin slot, press firmly until both latches click. The step often missed is confirming the BIOS recognises the module as ECC registered at 1600 MHz.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.