Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

A-Tech

A-Tech 8GB DDR3 1600MHz ECC RDIMM 2Rx8 47J0212 00D4995 Server Memory

SKU CH-YVW6-BG04R

An 8 GB DDR3-1600 ECC registered DIMM with CL11 latency and 1.5 V operation for IBM-Lenovo servers

  • Capacity8GB
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 8GB capacity expands server memory for heavier workloads
  • DDR3 1600MHz speed accelerates data throughput
  • ECC registered design detects and corrects memory errors
  • 2Rx8 dual-rank organisation increases density per slot
  • 5V standard voltage matches DDR3 platform requirements

8GB DDR3 1600MHz ECC RDIMM

This A-Tech module delivers 8GB of DDR3 1600MHz registered ECC memory for server and workstation systems. It operates at 1.50V with CL11 latency and a 2Rx8 rank configuration. The 240-pin DIMM is built as a compatible replacement for IBM-Lenovo part numbers 47J0212 and 00D4995.

Suited for ECC registered DDR3 slots only

This module fits systems that require DDR3 ECC registered DIMMs at 1600MHz. It will not work in platforms that need unbuffered memory, non-ECC modules, or a different DDR generation. Builders using consumer desktop boards or laptops should look at something else.

Registered ECC with 2Rx8 organisation

The single specification that decides fit is the registered ECC 2Rx8 organisation at DDR3 1600MHz. Your system must support registered error-correcting modules with this rank layout and speed; otherwise the module will not be recognised or will cause instability.

Kohokohdat

  • 8GB capacity expands server memory for heavier workloads
  • DDR3 1600MHz speed accelerates data throughput
  • ECC registered design detects and corrects memory errors
  • 2Rx8 dual-rank organisation increases density per slot
  • 5V standard voltage matches DDR3 platform requirements

Tekniset tiedot

BrandA-Tech
SeriesCompatible Replacement for IBM-Lenovo
Model47J0212, 00D4995
Capacity8GB
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor Brand Chipset
Features47J0212, 00D4995

Kysymyksiä tästä tuotteesta

How do I install the 240-pin DDR3 DIMM in my server, and what step is often missed?

Align the notch on the module with the slot key, press down firmly until both retention clips click, and verify the system recognises the 8 GB capacity at 1600 MHz.

Will the 1.5 V registered ECC module need any firmware updates or component swaps later?

No scheduled firmware updates or component swaps are required; the module is tested for lifetime reliability at CL11 latency.

What thermal or electrical limit appears first when the 2Rx8 RDIMM runs at full load continuously?

The 1.5 V DDR3 standard voltage and CL11 timing define the operating envelope; sustained loads stay within JEDEC limits for registered DIMMs.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.