Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green 240-pin DDR3 ECC registered DIMM with black chips

A-Tech

A-Tech 8GB DDR3 1866MHz ECC RDIMM 1Rx4 240-Pin Server Memory

SKU CH-0VGH-3D222

Adds 8 GB of DDR3 1866 MHz ECC registered memory with CL13 timing and 1.5 V operation for compatible servers

  • Capacity8GB
  • SpeedDDR3 1866 (PC3 14900)
  • CAS LatencyCL13
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection prevents data corruption with registered DDR3 architecture
  • 1866 MHz speed delivers responsive server performance at PC3-14900 bandwidth
  • 50 V standard voltage ensures broad DDR3 platform compatibility
  • 240-pin RDIMM form factor fits registered DIMM server slots
  • CL13 latency provides efficient timing for registered memory modules

Server ECC RDIMM for Workstation Upgrades

This 8 GB DDR3 module runs at 1866 MHz with CL13 latency and 1.50 V operation. It is built as a registered DIMM with ECC for data integrity in server and workstation environments. The single-rank 1Rx4 organisation uses major-brand chips on a 240-pin form factor.

DDR3 Platform Voltage and Speed Ceiling

DDR3 memory tops out at 1.5 V standard voltage and 1866 MHz speed for this module class. Registered DIMMs add a clock cycle of latency compared to unbuffered types, which can limit peak bandwidth in latency-sensitive tasks. The PC3-14900 rating reflects the maximum theoretical throughput of this generation.

Keyed 240-Pin Installation and Compatibility Checks

The 240-pin keyed connector prevents incorrect insertion, but the module only fits motherboards that support DDR3 RDIMM ECC memory. Mixing registered and unbuffered DIMMs or exceeding the board's maximum rank count per channel will prevent boot. Verify the system manual for supported speeds, voltages and population rules before installing.

Kohokohdat

  • ECC protection prevents data corruption with registered DDR3 architecture
  • 1866 MHz speed delivers responsive server performance at PC3-14900 bandwidth
  • 50 V standard voltage ensures broad DDR3 platform compatibility
  • 240-pin RDIMM form factor fits registered DIMM server slots
  • CL13 latency provides efficient timing for registered memory modules

Tekniset tiedot

BrandA-Tech
Capacity8GB
SpeedDDR3 1866 (PC3 14900)
CAS LatencyCL13
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Kysymyksiä tästä tuotteesta

Should I pick the 1Rx4 version or a dual-rank module for my server?

The 1Rx4 organisation places all eight gigabytes on a single rank, so the memory controller sees one logical rank per DIMM; this can allow higher total capacity per channel on platforms that limit the number of ranks.

What does the 1866 MHz speed rating mean once the module is installed?

The module runs at 1866 MT/s with a CAS latency of 13 cycles at the standard 1.5 V, delivering a peak transfer rate of PC3-14900 when the platform supports that data rate.

How does the 240-pin registered DDR3 interface limit performance in practice?

The 240-pin registered DDR3 interface caps the module at 1866 MT/s and 1.5 V operation; the register adds one clock cycle of address/command buffering, which is required for stability in multi-DIMM server configurations.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.