Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green 240-pin DDR3 DIMM with black chips and a silver label

A-Tech

A-Tech 8GB DDR3 1866MHz ECC RDIMM 1Rx4 Dell A7187317 SNPT0F69C/8G Server Memory

SKU CH-M5D8-4GV9F

ECC registered DDR3 server module with 8 GB capacity, 1866 MHz speed and CL13 latency

  • Capacity8GB
  • SpeedDDR3 1866 (PC3 14900)
  • CAS LatencyCL13
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC registered design protects data integrity in server workloads
  • DDR3 1866 MHz speed with CL13 latency supports responsive multitasking
  • 50 V standard voltage ensures broad platform compatibility
  • 240-pin RDIMM form factor fits Dell A7187317 and SNPT0F69C/8G slots
  • Major-brand chipset and lifetime warranty deliver reliable long-term operation

Server memory upgrade

This 8GB DDR3 1866MHz ECC RDIMM module is built for Dell servers and workstations that require registered memory with error correction. It replaces Dell part numbers A7187317 and SNPT0F69C/8G using a single 1Rx4 rank.

DDR3 1866MHz registered limits

The DDR3 1866 standard tops out at PC3-14900 bandwidth with a CL13 latency at 1.5V. Registered DIMMs add a buffer that reduces electrical load on the memory controller, allowing larger total capacities per channel than unbuffered modules can achieve.

240-pin DIMM installation notes

The 240-pin DDR3 DIMM slots into the server motherboard with the notch aligned to the key. Registered ECC modules must be paired with a platform that supports both registration and error correction; consumer boards without those features will not recognise the memory.

Kohokohdat

  • ECC registered design protects data integrity in server workloads
  • DDR3 1866 MHz speed with CL13 latency supports responsive multitasking
  • 50 V standard voltage ensures broad platform compatibility
  • 240-pin RDIMM form factor fits Dell A7187317 and SNPT0F69C/8G slots
  • Major-brand chipset and lifetime warranty deliver reliable long-term operation

Tekniset tiedot

BrandA-Tech
Capacity8GB
SpeedDDR3 1866 (PC3 14900)
CAS LatencyCL13
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Kysymyksiä tästä tuotteesta

Should I choose the single 8GB module or look for a different capacity?

This listing is a single 8GB module; add multiple units to reach your server's total memory target and populate channels evenly for best throughput.

What does the 1866MHz speed mean once the module is installed?

The module runs at DDR3 1866MHz with CL13 latency at 1.5V, giving your server the rated PC3-14900 data rate for memory-bound workloads.

Will the 240-pin registered ECC DDR3 interface work in my Dell server?

The 240-pin DDR3 RDIMM uses standard registered ECC signalling at 1.5V; verify your system's qualified-vendor list for Dell part numbers A7187317 or SNPT0F69C/8G before ordering.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.