Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green circuit board with black memory chips and gold edge connector

A-Tech

A-Tech 8GB DDR3 1866MHz PC3-14900 ECC RDIMM 1Rx4 Server Memory

SKU CH-JNH8-QJJQ2

8GB DDR3 1866MHz ECC RDIMM replacement for Samsung M393B1G70BH0-CMA, M393B1G70DB0-CMA, M393B1G70EB0-CMA, M393B1G70QH0-CMA with CL13 latency and 1.5V operation

  • Capacity8GB
  • SpeedDDR3 1866 (PC3 14900)
  • CAS LatencyCL13
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection guards data integrity with registered DDR3 design
  • 1866 MHz speed accelerates server workloads at PC3-14900 bandwidth
  • CL13 latency at 1.5V voltage balances responsiveness and stability
  • 240-pin DIMM form factor fits standard server memory slots
  • Samsung M393B1G70 series compatibility simplifies drop-in replacement

Server ECC RDIMM for registered platforms

This 8 GB DDR3 module runs at 1866 MHz with PC3-14900 bandwidth and CL13 latency. It uses a registered design with ECC and a 1Rx4 organisation, operating at the standard 1.5 V. The 240-pin DIMM fits server and workstation boards that require registered memory.

Fits registered DDR3 slots.

The stick needs a motherboard that supports registered ECC DDR3; it will not work in consumer boards that only accept unbuffered modules. Using registered memory removes the electrical load of multiple ranks from the memory controller, allowing larger total capacities across populated slots.

Standard voltage keeps thermals modest

At 1.5 V the module draws typical DDR3 power without elevated heat, so standard server airflow is sufficient. Registered buffering adds negligible latency while the ECC logic corrects single-bit errors transparently, maintaining stability under sustained workloads.

Kohokohdat

  • ECC protection guards data integrity with registered DDR3 design
  • 1866 MHz speed accelerates server workloads at PC3-14900 bandwidth
  • CL13 latency at 1.5V voltage balances responsiveness and stability
  • 240-pin DIMM form factor fits standard server memory slots
  • Samsung M393B1G70 series compatibility simplifies drop-in replacement

Tekniset tiedot

BrandA-Tech
Capacity8GB
SpeedDDR3 1866 (PC3 14900)
CAS LatencyCL13
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Kysymyksiä tästä tuotteesta

What is the CAS latency of this DDR3 1866MHz ECC RDIMM?

The module runs at CL13 latency, which is the timing figure listed for this 1866 MHz PC3-14900 registered DIMM.

How much power does the 1.50V registered DIMM draw under continuous server workloads?

It operates at the standard DDR3 voltage of 1.50V; registered buffering adds negligible extra draw compared with unbuffered modules of the same speed.

Which motherboard slot and chipset features are required for this 240-pin registered ECC module?

A DDR3 240-pin DIMM slot that supports registered ECC memory is required; consumer boards without registered support will not work.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.