Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green 240-pin DDR3L RDIMM with black chips and silver contacts

A-Tech

A-Tech 8GB DDR3L 1333 ECC RDIMM 1Rx4 Server Memory

SKU CH-R8WN-8PQJE

8GB DDR3L 1333 ECC registered DIMM with 1Rx4 layout for server upgrades

  • Capacity8GB
  • SpeedDDR3L 1333 (PC3L 10600)
  • CAS LatencyCL9
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 8GB capacity expands server workload headroom
  • DDR3L 1333MHz speed matches PC3L-10600 spec
  • ECC registered design corrects data errors automatically
  • 35V low voltage reduces power draw per module
  • 240-pin DIMM form factor fits standard DDR3 slots

8GB DDR3L 1333 ECC RDIMM

This 8GB DDR3L module runs at 1333 MHz with CL9 latency and 1.35V operation. It uses a registered DIMM design with ECC for error correction in server and workstation platforms. The single-rank 1Rx4 organisation fits standard 240-pin DDR3 slots. It serves as a direct replacement for Hynix HMT41GV7AFR4A-H9 and HMT41GV7BFR4A-H9 parts.

Sustained load stability

Registered buffering and ECC circuitry maintain data integrity during continuous workloads. The 1.35V low-voltage DDR3L specification reduces power draw and heat output compared to standard 1.5V DDR3. CL9 timing at 1333 MHz delivers consistent throughput for virtualisation, database and compute tasks that run for extended periods.

Build quality and day-to-day fit

Major-brand chips undergo quality-assurance testing before shipment. The 240-pin DIMM form factor matches existing DDR3 server boards without adapter cables. Registered signalling places less electrical load on the memory controller, allowing larger memory populations per channel. Buyers needing non-ECC or unbuffered UDIMM modules for desktop boards should look elsewhere.

Kohokohdat

  • 8GB capacity expands server workload headroom
  • DDR3L 1333MHz speed matches PC3L-10600 spec
  • ECC registered design corrects data errors automatically
  • 35V low voltage reduces power draw per module
  • 240-pin DIMM form factor fits standard DDR3 slots

Tekniset tiedot

BrandA-Tech
Capacity8GB
SpeedDDR3L 1333 (PC3L 10600)
CAS LatencyCL9
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Kysymyksiä tästä tuotteesta

How much power does the 1.35 V DDR3L module draw when the server runs continuously?

The DDR3L 1333 module operates at 1.35 V, which is lower than standard DDR3 voltage, reducing power draw and heat during all-day operation.

What must the system already provide for this 240-pin registered ECC DIMM to function?

The motherboard needs a DDR3L-compatible 240-pin DIMM slot, a chipset that supports registered ECC memory, and a BIOS that enables ECC operation.

Will this CL9 1Rx4 stick work alongside older DDR3 1333 modules already installed?

Yes, if the existing modules are also DDR3L 1333 ECC registered DIMMs; mixing voltages, speeds, or ECC types can prevent the system from posting.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.