Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

A-Tech

A-Tech 8GB DDR3L 1333 ECC RDIMM 2Rx4 1.35V Micron MT36KSF1G72PZ-1G4M1FI HE HF HG HI server RAM

SKU CH-W6SJ-9V6M8

An 8 GB DDR3L 1333 MHz registered ECC server module with 2Rx4 organisation and 1.35 V operation

  • Capacity8GB
  • SpeedDDR3L 1333 (PC3L 10600)
  • CAS LatencyCL9
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection prevents data corruption in critical workloads
  • Registered design improves signal integrity for dense server configurations
  • DDR3L 1.35V operation reduces power draw and heat output
  • 2Rx4 organisation increases memory density per channel
  • 1333MHz speed with CL9 latency delivers responsive throughput

Product Identity

This is an 8GB DDR3L 1333 ECC registered DIMM built as a compatible replacement for Micron MT36KSF1G72PZ-1G4M1FI and related part numbers. It operates at 1.35V with CL9 latency and a 2Rx4 organisation on a 240-pin form factor.

Who It Suits

It suits administrators upgrading or repairing servers and workstations that specifically call for DDR3L 1333 registered ECC modules in this capacity and rank configuration. It is not for systems that require unbuffered memory, non-ECC modules, or a different voltage, speed or pin layout.

Deciding Specification

The registered ECC design combined with DDR3L 1333 speed at 1.35V determines whether this module will be accepted by the platform; the memory controller must support registered operation and the low-voltage DDR3L standard.

Kohokohdat

  • ECC protection prevents data corruption in critical workloads
  • Registered design improves signal integrity for dense server configurations
  • DDR3L 1.35V operation reduces power draw and heat output
  • 2Rx4 organisation increases memory density per channel
  • 1333MHz speed with CL9 latency delivers responsive throughput

Tekniset tiedot

BrandA-Tech
SeriesCompatible Replacement for Micron
ModelMT36KSF1G72PZ-1G4M1FI, MT36KSF1G72PZ-1G4M1HE, MT36KSF1G72PZ-1G4M1HF, MT36KSF1G72PZ-1G4M1HG, MT36KSF1G72PZ-1G4M1HI
Capacity8GB
SpeedDDR3L 1333 (PC3L 10600)
CAS LatencyCL9
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMicron Chipset
FeaturesMT36KSF1G72PZ-1G4M1FI, MT36KSF1G72PZ-1G4M1HE, MT36KSF1G72PZ-1G4M1HF, MT36KSF1G72PZ-1G4M1HG, MT36KSF1G72PZ-1G4M1HI

Kysymyksiä tästä tuotteesta

Does this DDR3L 1333 ECC RDIMM run at 1.35 V or 1.5 V?

This module is DDR3L rated at 1.35 V, the low-voltage variant of DDR3.

Will the 240-pin DIMM fit my server's memory slots?

It uses the standard 240-pin DDR3 DIMM form factor, so it fits any DDR3 RDIMM slot.

Do I need to install these in matched pairs for the registered ECC to work?

Registered ECC works per module; install in the slots your motherboard manual specifies for population order.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.