Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green rectangular 240-pin DDR3L server memory module with black chips and gold contacts

A-Tech

A-Tech 8GB DDR3L 1333MHz ECC RDIMM 2Rx4 Server RAM

SKU CH-EE9E-DMTY2

8GB DDR3L 1333MHz ECC registered server memory module with 1.35V low voltage operation

  • Capacity8GB
  • SpeedDDR3L 1333 (PC3L 10600)
  • CAS LatencyCL9
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 8GB DDR3L 1333MHz capacity handles demanding server workloads
  • ECC registered design protects data integrity in critical applications
  • 35V low-voltage operation reduces power draw and heat
  • 240-pin 2Rx4 form factor fits compatible HP server slots
  • Compatible replacement for HP part numbers including 647650-071 and 500662-B21

8GB DDR3L 1333MHz ECC Registered Server Module

This single 8GB DDR3L module runs at 1333MHz with CL9 latency and 1.35V operation. It uses a 240-pin DIMM form factor and includes ECC with registered buffering for error correction and signal stability in server platforms.

Suited for HP systems referencing the listed part

The module matches HP part numbers including 500662, 604502, 604506, 606425, 606427, 647650, 647877 and 647897. It is not for desktop boards that require unbuffered non-ECC memory or for platforms that only support higher-voltage DDR3 at 1.5V.

Fits 240-pin DDR3 slots

The registered design places a register between the DRAM and the memory controller, reducing electrical load on the bus. This frees the platform to populate more slots per channel while the low 1.35V draws less power than standard DDR3.

Kohokohdat

  • 8GB DDR3L 1333MHz capacity handles demanding server workloads
  • ECC registered design protects data integrity in critical applications
  • 35V low-voltage operation reduces power draw and heat
  • 240-pin 2Rx4 form factor fits compatible HP server slots
  • Compatible replacement for HP part numbers including 647650-071 and 500662-B21

Tekniset tiedot

BrandA-Tech
Capacity8GB
SpeedDDR3L 1333 (PC3L 10600)
CAS LatencyCL9
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Kysymyksiä tästä tuotteesta

What server slot and voltage must my system provide for this DDR3L 1333 MHz 1.35 V 240-pin RDIMM to operate?

Your server needs a DDR3 240-pin DIMM slot that supplies 1.35 V and supports registered ECC modules at 1333 MHz.

Will this 2Rx4 CL9 registered ECC module run with my existing 1Rx8 CL9 DDR3L RDIMMs in the same channel?

Mixing 2Rx4 and 1Rx8 registered ECC DIMMs is often supported but depends on the server BIOS; populate identical ranks per channel for best stability.

How can I confirm the module is detected at DDR3-1333 CL9 with ECC active after installation?

Check the BIOS memory information or run a tool such as dmidecode or CPU-Z to verify speed 1333 MT/s, CAS 9, and ECC enabled.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.