Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green 240-pin DDR3L ECC RDIMM module with black chips and silver edge contacts

A-Tech

A-Tech 8GB DDR3L 1600 ECC RDIMM 2Rx4 1.35V server RAM

SKU CH-BNAC-F8W8M

8 GB DDR3L 1600 ECC registered DIMM at 1.35 V for Dell server upgrades

  • Capacity8GB
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection prevents data errors in critical workloads
  • Registered signal buffering improves stability in multi-DIMM servers
  • DDR3L 1.35 V operation reduces power draw versus standard DDR3
  • 2Rx4 dual-rank organisation increases memory density per slot
  • 240-pin DIMM form factor fits compatible DDR3L server platforms

8GB DDR3L 1600 ECC RDIMM for Servers

This 8GB DDR3L 1600 ECC RDIMM module is built for servers and workstations that require registered memory with error correction. It operates at 1.35V low voltage and uses a 2Rx4 rank configuration. The 240-pin DIMM fits systems designed for PC3L-12800 speed.

DDR3L platform voltage and registered buffer limits

DDR3L memory runs at 1.35V rather than the standard 1.5V, so the platform must support low-voltage operation. The registered buffer adds one clock cycle of latency and requires a motherboard with a registered DIMM slot. Systems built for unbuffered UDIMMs cannot use this module.

2Rx4 rank layout decides compatibility

The 2Rx4 organization means the module presents two ranks of x4 chips to the memory controller. Some server platforms limit the number of ranks per channel or require specific rank populations per slot. Verify the system's qualified vendor list before purchasing.

Kohokohdat

  • ECC protection prevents data errors in critical workloads
  • Registered signal buffering improves stability in multi-DIMM servers
  • DDR3L 1.35 V operation reduces power draw versus standard DDR3
  • 2Rx4 dual-rank organisation increases memory density per slot
  • 240-pin DIMM form factor fits compatible DDR3L server platforms

Tekniset tiedot

BrandA-Tech
Capacity8GB
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Kysymyksiä tästä tuotteesta

Should I choose the 8 GB module or look for a different capacity?

This listing is a single 8 GB DDR3L 1600 registered ECC module; select it if your server needs one 8 GB stick, otherwise choose a kit or capacity that matches your system's supported configuration.

What does the 1600 MHz rating deliver in my server?

The module operates at DDR3L 1600 with CL11 timing, providing the rated data rate for registered ECC workloads in compatible platforms.

Is the 240-pin DDR3L interface compatible with standard DDR3 slots?

It uses a 240-pin DDR3L form factor at 1.35 V; the lower voltage is backward compatible with 1.5 V DDR3 slots, but the registered ECC design requires a server or workstation motherboard that supports registered memory.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.