Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green rectangular SO-DIMM module with black chips and gold contacts

A-Tech

A-Tech 8GB DDR3L 1600 SO-DIMM 204-Pin 1.35V

SKU CH-K77F-VY45H

8GB DDR3L 1600 SO-DIMM laptop memory upgrade running at 1.35V with CL11 latency

  • Capacity8GB
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCNo
  • 8GB capacity lets you run more applications at once
  • 1600 MHz DDR3L speed matches PC3L-12800 system specs
  • 35 V low-voltage operation reduces laptop power draw
  • CL11 latency keeps data access responsive
  • 204-pin SO-DIMM form factor fits standard laptop slots

What this module is and who needs it

This A-Tech 8 GB DDR3L 1600 SO-DIMM is a direct replacement for the Micron MT18KSF1G72HZ-1G6P1ZE module. It is built for laptops, notebooks and all-in-one systems that accept 204-pin DDR3L memory running at 1.35 V. The unbuffered, non-ECC design matches the original specification and is tested for reliable operation.

Who should buy it and who should not

Buyers who need an 8 GB DDR3L 1600 SO-DIMM to replace a failed Micron stick or to add capacity in a compatible slot will find this module fits the requirement. Systems that require ECC, registered memory, 1.5 V DDR3, or a different pin count cannot use this part. Buyers who want more than 8 GB per slot should look at a different module.

The specification that decides compatibility

The module is a 204-pin DDR3L SO-DIMM rated at 1600 MHz (PC3L-12800) with a CAS latency of CL11 and a voltage of 1.35 V. Your system must support DDR3L at this voltage and speed in an unbuffered, non-ECC configuration for the module to work.

Kohokohdat

  • 8GB capacity lets you run more applications at once
  • 1600 MHz DDR3L speed matches PC3L-12800 system specs
  • 35 V low-voltage operation reduces laptop power draw
  • CL11 latency keeps data access responsive
  • 204-pin SO-DIMM form factor fits standard laptop slots

Tekniset tiedot

BrandA-Tech
SeriesCompatible Replacement for Micron
ModelMT18KSF1G72HZ-1G6P1ZE
Capacity8GB
Type204-Pin DDR3 SO-DIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCNo
Buffered/RegisteredUnbuffered
Heat SpreaderNo
FeaturesMT18KSF1G72HZ-1G6P1ZE
Recommend UseCompatible Replacement for Micron MT18KSF1G72HZ-1G6P1ZE

Kysymyksiä tästä tuotteesta

Will the 204-pin SO-DIMM fit my laptop's memory slot?

This module uses the standard 204-pin DDR3 SO-DIMM form factor used by most laptops and AIOs that support DDR3L memory.

Do I need to change any BIOS settings after inserting the CL11 module?

Install the stick with the notch aligned, press firmly until the side clips click; the BIOS will detect the 1600 MHz speed and 1.35 V voltage automatically.

Does the unbuffered non-ECC design mean I must replace it on a schedule?

No scheduled replacement is required; solid-state DRAM has no moving parts and the module is tested for long-term reliability.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.