Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green 240-pin DDR3L server DIMM with black chips

A-Tech

A-Tech 8GB DDR3L 1600MHz ECC RDIMM 1Rx4 1.35V 240-Pin Server Memory

SKU CH-V77M-8678G

ECC registered DDR3L server DIMM, 8 GB at 1600 MHz CL11, 1.35 V low voltage, 240-pin, lifetime warranty

  • Capacity8GB
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 8GB capacity expands server memory headroom for heavier workloads
  • DDR3L 1600MHz speed accelerates data throughput in compatible systems
  • ECC registered design detects and corrects single-bit errors automatically
  • Low 1.35V operation reduces power draw and thermal load
  • 240-pin RDIMM form factor fits standard DDR3 server slots

8GB DDR3L 1600MHz ECC RDIMM Server Module

This 8GB DDR3L module runs at 1600MHz with CL11 latency and operates at 1.35V. It is a registered ECC DIMM built with a 1Rx4 configuration on a 240-pin form factor. The part is validated as a compatible replacement for the Kingston KTM-SX316LLVS/8G and is intended for server and workstation platforms that require registered error-correcting memory.

Suits servers needing registered ECC DDR3L at 1.35V

IT teams maintaining legacy platforms that specify DDR3L 1600MHz registered DIMMs with ECC will find this module matches the required voltage, pin count and buffering. Builders assembling new consumer desktops or laptops that accept only unbuffered non-ECC memory cannot use this part. Systems limited to 262-pin SO-DIMM slots are also incompatible.

Registered ECC buffering decides compatibility

The single specification that determines fit is the registered ECC design combined with 240-pin DDR3L signalling at 1.35V. A motherboard must explicitly support registered ECC RDIMMs of this voltage and pin layout; unbuffered or non-ECC slots will not recognise the module. Verify the platform memory qualification list before ordering.

Kohokohdat

  • 8GB capacity expands server memory headroom for heavier workloads
  • DDR3L 1600MHz speed accelerates data throughput in compatible systems
  • ECC registered design detects and corrects single-bit errors automatically
  • Low 1.35V operation reduces power draw and thermal load
  • 240-pin RDIMM form factor fits standard DDR3 server slots

Tekniset tiedot

BrandA-Tech
SeriesCompatible Replacement for Kingston
ModelKTM-SX316LLVS/8G
Capacity8GB
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMajor Brand Chipset
FeaturesKTM-SX316LLVS/8G

Kysymyksiä tästä tuotteesta

Will the 1Rx4 ECC RDIMM need any firmware updates or periodic replacement?

The module has no firmware and no moving parts; it does not require periodic replacement.

What limits sustained throughput on this DDR3L 1600 CL11 registered stick?

The CL11 latency and 1600 MT/s bus speed set the maximum sustained bandwidth.

How much heat and power does the 1.35 V DDR3L module produce under continuous load?

At 1.35 V the module draws less power and runs cooler than standard 1.5 V DDR3.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.