Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green DDR3L ECC RDIMM module with black chips and gold contacts

A-Tech

A-Tech 8GB DDR3L 1600MHz ECC RDIMM 2Rx4 1.35V Server RAM

SKU CH-67ZR-ETB2G

8GB DDR3L 1600MHz ECC registered DIMM for Cisco servers, 2Rx4 CL11 1.35V

  • Capacity8GB
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection prevents data errors with registered DDR3L design
  • Low 1.35V operation cuts server power draw versus standard DDR3
  • 1600MHz CL11 speed delivers responsive throughput for virtualised workloads
  • 2Rx4 8GB density fits Cisco UCS-MR-1X082RY-A and 15-13637-02 slots
  • 240-pin DDR3 DIMM form factor installs directly in compatible server boards

DDR3L 1600MHz ECC Registered DIMM

This A-Tech 8GB DDR3L 1600MHz ECC RDIMM is a registered server memory module built for 240-pin DDR3 slots. It operates at 1.35V low voltage with CL11 latency and a 2Rx4 rank configuration using major brand chipsets.

Suited for Cisco UCS upgrades needing DDR3L ECC

This module matches the Cisco UCS-MR-1X082RY-A and 15-13637-02 part numbers for direct replacement in compatible systems. It is not suitable for platforms that require unbuffered UDIMM memory, non-ECC modules, or different DDR generations and pin counts.

240-pin DDR3L form factor decides fit

The module uses the 240-pin DDR3 DIMM form factor at 1.35V, so it only fits servers and workstations designed for DDR3L registered ECC memory. Verify your system documentation for this exact specification before purchase.

Kohokohdat

  • ECC protection prevents data errors with registered DDR3L design
  • Low 1.35V operation cuts server power draw versus standard DDR3
  • 1600MHz CL11 speed delivers responsive throughput for virtualised workloads
  • 2Rx4 8GB density fits Cisco UCS-MR-1X082RY-A and 15-13637-02 slots
  • 240-pin DDR3 DIMM form factor installs directly in compatible server boards

Tekniset tiedot

BrandA-Tech
SeriesCompatible Replacement for Cisco
ModelUCS-MR-1X082RY-A, 15-13637-02
Capacity8GB
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesUCS-MR-1X082RY-A, 15-13637-02

Kysymyksiä tästä tuotteesta

How much power does the 1.35V DDR3L module draw when the server runs continuously?

Operating at 1.35V, this DDR3L RDIMM consumes less power than standard 1.5V DDR3, reducing heat output during 24/7 server workloads.

What motherboard slot and chipset support are required to install this 240-pin registered ECC DIMM?

You need a server or workstation board with a 240-pin DDR3 DIMM slot that accepts registered ECC memory and supports 2Rx4 organisation at 1600MHz.

Will this 2Rx4 CL11 module work alongside older 1Rx8 DDR3 sticks already in my Cisco UCS chassis?

Mixing 2Rx4 and 1Rx8 ranks is not guaranteed; the system may default to the slowest timing or disable the mismatched DIMMs, so verify the platform's qualified vendor list first.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.