Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green circuit board with black memory chips, 204 gold pins along the bottom edge, thin rectangular shape

A-Tech

A-Tech 8GB DDR3L 1600MHz ECC SODIMM 1.35V 204-Pin

SKU CH-RHDP-KTG0P

8 GB DDR3L 1600 MHz ECC SODIMM module at 1.35 V for laptop or microserver upgrades

  • Capacity8GB
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes
  • ECC protection prevents data corruption in servers
  • Unbuffered DDR3L design runs at 1.35V for lower power draw
  • 1600 MHz CL11 speed keeps microserver workloads responsive
  • 204-pin SODIMM form factor fits compatible laptop and microserver slots
  • Tested replacement for Micron MT18KSF1G72HZ-1G6E2ZE module

8GB DDR3L ECC SODIMM for Micron

This 8GB DDR3L 1600MHz ECC SODIMM module is built as a compatible replacement for the Micron MT18KSF1G72HZ-1G6E2ZE part. It targets administrators upgrading memory in microserver, server or workstation platforms that require unbuffered ECC SO-DIMMs operating at 1.35V.

ECC unbuffered operation at 1.35V

The module delivers DDR3L 1600 (PC3L 12800) speed with CL11 latency and 2Rx8 organisation. Error-correcting code is active while the stick remains unbuffered, so the platform must support ECC unbuffered SO-DIMMs at the 1.35V low-voltage level for the memory to function correctly.

Tested module with lifetime warranty

Every unit undergoes quality-assurance testing before shipment and is covered by a lifetime warranty. United States based technical support is available before, during and after purchase to assist with compatibility verification or installation questions.

Kohokohdat

  • ECC protection prevents data corruption in servers
  • Unbuffered DDR3L design runs at 1.35V for lower power draw
  • 1600 MHz CL11 speed keeps microserver workloads responsive
  • 204-pin SODIMM form factor fits compatible laptop and microserver slots
  • Tested replacement for Micron MT18KSF1G72HZ-1G6E2ZE module

Tekniset tiedot

BrandA-Tech
SeriesCompatible Replacement for Micron
ModelMT18KSF1G72HZ-1G6E2ZE
Capacity8GB
Type204-Pin DDR3 SO-DIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredUnbuffered
Heat SpreaderNo
FeaturesMT18KSF1G72HZ-1G6E2ZE
Recommend UseCompatible Replacement for Micron MT18KSF1G72HZ-1G6E2ZE

Kysymyksiä tästä tuotteesta

What does the 1600MHz speed mean when the module is installed in a real machine?

The module runs at DDR3L 1600 (PC3L 12800) with CL11 latency at 1.35V, delivering the rated throughput provided the platform supports DDR3L at that frequency.

How does the ECC SODIMM interface affect what the memory can do in practice?

As an unbuffered ECC SO-DIMM it provides single-bit error correction and multi-bit detection for data integrity, while operating within the standard DDR3L SO-DIMM electrical limits.

What physical slot and keying does the 204-pin module need to fit and mount?

It requires a DDR3L SO-DIMM socket with 204 pins; the low-voltage keying prevents insertion into standard DDR3 1.5V slots.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.