Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green 288-pin DDR4 DIMM with black chips and silver label

A-Tech

A-Tech 8GB DDR4-2133 ECC RDIMM 1Rx4 CL15 1.2V Server Memory

SKU CH-W161-G6Z0W

8GB DDR4-2133 ECC registered DIMM with CL15 timing for HP server upgrades

  • Capacity8GB
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection guards data integrity with registered DDR4 architecture
  • 2133 MHz speed and CL15 latency deliver responsive server performance
  • 2 V operation matches DDR4 standard voltage for efficient power use
  • 8 GB capacity in a single 288-pin RDIMM module simplifies upgrades
  • Tested compatibility with HP part numbers including 726718, 752368, 774170, 780672, 784671, 790109, 803028, 807816

8GB DDR4-2133 ECC Registered DIMM

This 8GB DDR4-2133 module is built for servers and workstations that require error-correcting registered memory. It operates at the standard 1.2V voltage and uses a 1Rx4 organisation with CL15 latency. The 288-pin form factor fits DDR4 DIMM slots in compatible enterprise platforms.

Registered ECC with 1Rx4 organisation

The single specification that decides fit is the registered ECC design combined with a 1Rx4 rank structure. Systems that expect unbuffered non-ECC UDIMMs or a different rank configuration will not accept this module. Verify the platform memory specification before ordering.

Straightforward DIMM installation

Installation follows the usual DIMM procedure: align the notch, press firmly until the retention clips engage, and confirm the module seats evenly. The most common issue is mixing registered and unbuffered modules in the same channel, which prevents the system from posting.

Kohokohdat

  • ECC protection guards data integrity with registered DDR4 architecture
  • 2133 MHz speed and CL15 latency deliver responsive server performance
  • 2 V operation matches DDR4 standard voltage for efficient power use
  • 8 GB capacity in a single 288-pin RDIMM module simplifies upgrades
  • Tested compatibility with HP part numbers including 726718, 752368, 774170, 780672, 784671, 790109, 803028, 807816

Tekniset tiedot

BrandA-Tech
Capacity8GB
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Kysymyksiä tästä tuotteesta

What does the 2133 MHz rating mean when the module is installed in a server?

The module runs at 2133 MHz, delivering a peak transfer rate of 17000 MB/s per channel when the platform supports DDR4-2133.

How does the registered DIMM interface affect usable speed and capacity?

The registered buffer adds one clock cycle of latency but lets the memory controller drive more modules per channel without signal degradation.

What physical slot and keying does this 288-pin DDR4 RDIMM require?

It fits a standard DDR4 288-pin DIMM socket with the DDR4 key notch; the registered design does not change the mechanical outline.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.