Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green rectangular DDR4 DIMM with black chips and gold contacts

A-Tech

A-Tech 8GB DDR4 2133 PC4-17000 2Rx8 DIMM for Hynix HMA41GU6AFR8N-TF HMA41GU6MFR8N-TF Desktop Memory

SKU CH-DQQJ-MDYBY

An 8 GB DDR4 2133 MHz DIMM module that replaces Hynix HMA41GU6AFR8N-TF and HMA41GU6MFR8N-TF for desktop upgrades

  • Capacity8GB
  • SpeedDDR4 2133 (PC4 17000)
  • Tested Frequency2133
  • Voltage1.20V
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • Boosts multitasking with 8 GB DDR4 capacity
  • Runs at 2133 MHz for responsive desktop performance
  • Low 1.2 V DDR4 voltage reduces power draw
  • 288-pin DIMM fits standard desktop memory slots
  • Tested replacement for Hynix HMA41GU6AFR8N-TF and HMA41GU6MFR8N-TF

A-Tech 8GB DDR4 2133 DIMM

This A-Tech desktop memory module provides 8GB of DDR4 2133 speed in a single 288-pin DIMM. It operates at the standard 1.2V DDR4 voltage and uses an unbuffered non-ECC design. The module is tested at 2133 MHz and rated PC4-17000 for reliable desktop upgrades.

Suits DDR4 desktop upgrades

This module suits owners of desktop systems that accept DDR4 2133 unbuffered non-ECC DIMMs and need an 8GB capacity increase. Builders requiring ECC error correction or registered memory for server platforms should look at different modules because this stick is strictly non-ECC unbuffered.

288-pin DDR4 DIMM form factor

The decisive specification is the 288-pin DDR4 DIMM form factor combined with DDR4 2133 speed and 1.2V operation. Only motherboards with DDR4 DIMM slots running at this voltage and frequency will accept the module; systems using any other memory generation or pin layout cannot use it.

Kohokohdat

  • Boosts multitasking with 8 GB DDR4 capacity
  • Runs at 2133 MHz for responsive desktop performance
  • Low 1.2 V DDR4 voltage reduces power draw
  • 288-pin DIMM fits standard desktop memory slots
  • Tested replacement for Hynix HMA41GU6AFR8N-TF and HMA41GU6MFR8N-TF

Tekniset tiedot

BrandA-Tech
Capacity8GB
SpeedDDR4 2133 (PC4 17000)
Tested Frequency2133
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
Recommend UseAMD & Intel Compatible

Kysymyksiä tästä tuotteesta

Will the 288-pin DIMM fit my standard desktop motherboard slots?

Yes, the module uses the standard 288-pin DDR4 DIMM form factor that matches mainstream desktop memory slots.

What is the correct way to seat the module so it locks in properly?

Align the notch with the slot key, press down firmly until both side clips click into place, then verify the module sits level.

Does the 1.20V DDR4 module need any future firmware updates or component replacement?

No, memory modules have no firmware or moving parts; they require no maintenance or scheduled replacement under normal use.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.