Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green rectangular DDR4 DIMM with black chips and gold contacts

A-Tech

A-Tech 8GB DDR4 2400 ECC RDIMM 2Rx8 CL17 Server Memory

SKU CH-2S0P-YHCE5

8GB DDR4 2400 ECC RDIMM with CL17 latency and 1.2V operation for server upgrades

  • Capacity8GB
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection prevents data corruption with registered DDR4 2400 CL17
  • 8 GB capacity expands server memory headroom for heavier workloads
  • 2Rx8 dual-rank organisation increases memory density per channel
  • 20 V standard DDR4 voltage keeps power draw within spec
  • 288-pin RDIMM form factor fits compatible server and workstation slots

8GB DDR4 ECC RDIMM for Servers

This 8GB DDR4 module runs at 2400MHz with CL17 latency and 1.20V operation. It is built as a registered DIMM with ECC for data integrity in server and workstation environments. The 2Rx8 organisation uses major-brand chips on a 288-pin PCB.

Registered ECC with 2Rx8 Organisation

The registered buffer and ECC circuitry are the deciding factors for compatibility. Only systems that explicitly support DDR4 RDIMM ECC memory will accept this module; standard desktop boards that require unbuffered non-ECC DIMMs will not work.

Simple DIMM Installation

Installation follows the standard 288-pin DIMM procedure: align the notch, press firmly until the retention clips engage, and confirm the module seats evenly. The most common issue is purchasing RDIMM ECC memory for a platform that only supports unbuffered non-ECC DIMMs.

Kohokohdat

  • ECC protection prevents data corruption with registered DDR4 2400 CL17
  • 8 GB capacity expands server memory headroom for heavier workloads
  • 2Rx8 dual-rank organisation increases memory density per channel
  • 20 V standard DDR4 voltage keeps power draw within spec
  • 288-pin RDIMM form factor fits compatible server and workstation slots

Tekniset tiedot

BrandA-Tech
Capacity8GB
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Kysymyksiä tästä tuotteesta

What does the 2400 MHz speed mean once the module is installed in a server?

The module will run at DDR4 2400 MHz, delivering PC4-19200 bandwidth as long as the platform supports that data rate.

How does the registered ECC design affect compatibility and error handling?

Registered ECC RDIMM adds a register between the DRAM and the memory controller, enabling error correction and supporting higher capacities per channel on compatible server boards.

What physical slot and pin count does this 2Rx8 module require?

It fits a standard DDR4 DIMM socket with 288 pins; the 2Rx8 organization does not change the mechanical keying.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.