Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green circuit board with black memory chips and gold edge connectors

A-Tech

A-Tech 8GB DDR4 2400 ECC UDIMM 1Rx8 CL17 1.2V KSM24ES8/8ME server RAM

SKU CH-5053-P23H5

8GB DDR4 2400 ECC UDIMM with CL17 latency and 1.2V operation for server reliability

  • Capacity8GB
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • 8GB capacity adds memory headroom for demanding workloads
  • DDR4 2400 speed delivers 19200 MB/s peak bandwidth
  • ECC UDIMM protects data integrity in server environments
  • CL17 latency at 1.2V balances responsiveness with efficiency
  • 288-pin DIMM form factor fits standard server memory slots

Target System & Purpose

This 8GB DDR4 ECC UDIMM is built for servers and workstations that require error-correcting memory. It suits administrators upgrading compatible platforms where data integrity matters more than raw speed. The module is not for desktop boards that lack ECC support or for builds needing registered DIMMs.

Thermals, Noise & Power

Operating at the standard DDR4 voltage of 1.20V, the module draws minimal power and produces negligible heat under normal workloads. As a passive component with no moving parts, it adds no audible noise to the chassis. The low voltage helps keep overall system thermals manageable.

Build Integration

The 288-pin DIMM fits standard DDR4 UDIMM slots and presents a single-rank 1Rx8 organisation with CL17 latency at 2400MHz. It frees a memory channel for additional capacity while delivering ECC protection. Verify your platform accepts unbuffered ECC DDR4 before installation.

Kohokohdat

  • 8GB capacity adds memory headroom for demanding workloads
  • DDR4 2400 speed delivers 19200 MB/s peak bandwidth
  • ECC UDIMM protects data integrity in server environments
  • CL17 latency at 1.2V balances responsiveness with efficiency
  • 288-pin DIMM form factor fits standard server memory slots

Tekniset tiedot

BrandA-Tech
Capacity8GB
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Kysymyksiä tästä tuotteesta

How do I install this 288-pin DDR4 UDIMM and what step do people often miss?

Align the notch on the module with the slot key, press down firmly until both side clips click shut, and verify the system recognises the full 8 GB at 2400 MHz in BIOS.

What maintenance or replacement will this ECC UDIMM need over time?

No scheduled maintenance is required; the module is tested for lifetime reliability and should only be replaced if a memory diagnostic reports uncorrectable errors.

What limit appears first when this 1.2 V CL17 module runs under sustained load?

The CAS latency of 17 cycles at 2400 MHz sets the timing boundary before thermal or voltage limits are reached.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.