Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green circuit board with black chips and gold contacts

A-Tech

A-Tech 8GB DDR4 2400MHz CL17 for Crucial BLS2K8G4D240FSE BLS4K8G4D240FSC BLS4K8G4D240FSE

SKU CH-G6B1-TFZJ2

8GB DDR4 desktop module running at 2400MHz with CL17 latency and 1.2V operation for compatible Crucial systems

  • Capacity8GB
  • SpeedDDR4 2400 (PC4 19200)
  • Tested Frequency2400
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCNo
  • 8GB capacity expands multitasking headroom for everyday workloads
  • DDR4 2400MHz speed accelerates data transfer rates
  • CL17 latency balances timing for responsive operation
  • 20V voltage reduces power draw versus older standards
  • 288-pin DIMM fits standard desktop motherboard slots

8GB DDR4 2400MHz Desktop Memory

This A-Tech module delivers 8GB of DDR4 memory at 2400MHz with CL17 latency. It is an unbuffered, non-ECC DIMM built to the standard 1.20V specification. The 288-pin design fits desktop systems requiring PC4-19200 performance. It serves as a direct replacement for specific Crucial part numbers.

Thermals and power draw

Operating at the standard DDR4 voltage of 1.20V keeps power consumption low during typical workloads. The module uses major brand chips validated through quality assurance testing for reliable operation. Without ECC or registered buffering, the electrical load remains minimal. Heat output stays modest under normal desktop use.

Upgrade path and value

This kit replaces Crucial BLS2K8G4D240FSE, BLS4K8G4D240FSC, BLS4K8G4D240FSE, and BLS8G4D240FSC modules. The jump is worth it when a system needs additional capacity or a verified compatible stick to fill an empty slot. Confirm your motherboard supports DDR4 2400MHz before purchasing.

Kohokohdat

  • 8GB capacity expands multitasking headroom for everyday workloads
  • DDR4 2400MHz speed accelerates data transfer rates
  • CL17 latency balances timing for responsive operation
  • 20V voltage reduces power draw versus older standards
  • 288-pin DIMM fits standard desktop motherboard slots

Tekniset tiedot

BrandA-Tech
Capacity8GB
SpeedDDR4 2400 (PC4 19200)
Tested Frequency2400
CAS LatencyCL17
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chips
FeaturesMajor Brand Chipset
Recommend UseAMD & Intel Compatible

Kysymyksiä tästä tuotteesta

How do I install the 288-pin DIMM and what step do people often miss?

Align the notch on the module with the slot key, press down firmly until both side clips click shut, then verify the system recognises the full 8GB at 2400MHz in BIOS.

What maintenance or replacement will this DDR4 module need later?

No scheduled maintenance is required; if errors appear, run a memory test and replace the stick if it fails, otherwise it lasts the system's life.

What limit appears first under sustained heavy workloads?

The CL17 latency at 2400MHz sets the throughput ceiling, so bandwidth saturates before the 1.20V thermal envelope becomes a concern.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.