Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green rectangular DDR4 DIMM with black chips and gold contacts

A-Tech

A-Tech 8GB DDR4 2400MHz ECC RDIMM 2Rx8 Server Memory

SKU CH-Z9KV-WS7FE

8GB DDR4 2400MHz ECC RDIMM with CL17 latency and 1.2V operation for server upgrades

  • Capacity8GB
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection prevents data corruption with registered DDR4 design
  • 2400 MHz speed handles demanding server workloads efficiently
  • 20 V operation reduces power draw in dense configurations
  • 2Rx8 dual-rank layout increases memory density per channel
  • 288-pin DIMM form factor fits standard server motherboards

Server-grade DDR4 ECC RDIMM

This 8 GB registered module is built for server and workstation platforms that require error-correcting memory. It operates at the standard DDR4 voltage of 1.20 V and uses a 288-pin DIMM form factor. The unit is a direct replacement for Hynix HMA41GR7AFR8N-UH and HMA41GR7BJR8N-UH part numbers.

Registered 2Rx8 organisation at CL17

The single decisive specification is the 2Rx8 registered layout combined with CL17 latency at 2400 MHz (PC4-19200). Systems that expect unbuffered UDIMMs or a different rank configuration will not accept this module, so verifying the motherboard’s qualified vendor list is essential before purchase.

Steady throughput under continuous workloads

Registered buffering reduces electrical load on the memory controller, allowing sustained data rates during prolonged compute tasks without the timing drift seen on unbuffered sticks. ECC correction maintains data integrity across extended runs, making the module suitable for virtualisation hosts, database servers and other 24/7 environments.

Kohokohdat

  • ECC protection prevents data corruption with registered DDR4 design
  • 2400 MHz speed handles demanding server workloads efficiently
  • 20 V operation reduces power draw in dense configurations
  • 2Rx8 dual-rank layout increases memory density per channel
  • 288-pin DIMM form factor fits standard server motherboards

Tekniset tiedot

BrandA-Tech
Capacity8GB
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Kysymyksiä tästä tuotteesta

What does the 2400 MHz speed actually deliver in a server?

The module runs at 2400 MT/s with CL17 latency and 1.20 V, giving the rated PC4-19200 data rate when the platform enables that speed.

How does the registered ECC interface affect usable bandwidth?

The RDIMM places a register between the DRAM and the memory controller, adding one cycle of latency but allowing larger capacities per channel while ECC corrects single-bit errors.

What physical slot and clearance does this 288-pin DIMM need?

It fits a standard DDR4 288-pin RDIMM slot; the module height follows the JEDEC profile so it clears typical server heatsinks.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.