Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green circuit board with black memory chips and gold contacts

A-Tech

A-Tech 8GB DDR4 2400MHz ECC UDIMM 1Rx8 Server Memory

SKU CH-Z7JY-EH6XV

8GB DDR4 2400MHz ECC UDIMM server memory with CL17 latency and 1.20V operation for reliable error-correcting performance

  • Capacity8GB
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • 8GB capacity expands server memory headroom for heavier workloads
  • DDR4 2400MHz PC4-19200 speed accelerates data throughput
  • ECC UDIMM with 1Rx8 rank detects and corrects single-bit errors
  • 20V standard DDR4 voltage reduces power draw per module
  • 288-pin unbuffered DIMM fits compatible server and workstation boards

A-Tech 8GB DDR4 2400MHz ECC UDIMM

This 8GB DDR4 module provides ECC unbuffered memory for servers and workstations that require error correction. It suits administrators upgrading compatible systems where data integrity is essential. The single-rank design fits standard 288-pin DIMM slots in supported platforms.

Thermals noise and power draw

Operating at the standard DDR4 voltage of 1.20V, the module runs within typical power limits for unbuffered server memory. Passive cooling through system airflow maintains stable temperatures during continuous workloads. No active cooling components are present on the module itself.

CL17 latency at 2400MHz

The CAS latency of CL17 at DDR4 2400 (PC4-19200) determines the module's response speed in compatible systems. Buyers who need lower latency or higher speed grades should verify their platform supports those specifications before purchasing.

Kohokohdat

  • 8GB capacity expands server memory headroom for heavier workloads
  • DDR4 2400MHz PC4-19200 speed accelerates data throughput
  • ECC UDIMM with 1Rx8 rank detects and corrects single-bit errors
  • 20V standard DDR4 voltage reduces power draw per module
  • 288-pin unbuffered DIMM fits compatible server and workstation boards

Tekniset tiedot

BrandA-Tech
Capacity8GB
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Kysymyksiä tästä tuotteesta

How do I install this 288-pin DDR4 UDIMM and what step is often missed?

Align the notch on the module with the key in the slot, press firmly until both side clips click, and verify the system recognises the full 8GB at 2400MHz in BIOS.

What maintenance or replacement will this ECC UDIMM need over time?

No routine maintenance is required; the module either passes POST or it fails, in which case the lifetime warranty covers replacement.

What limit appears first when this 1Rx8 CL17 module runs sustained workloads?

The 2400MHz speed and CL17 latency set the bandwidth ceiling; sustained loads will hit that throughput limit before voltage or thermal constraints.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.