Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green circuit board with black chips, 260 gold pins, no heat spreader

A-Tech

A-Tech 8GB DDR4 2666 ECC SODIMM 260-Pin CL19 1.20V

SKU CH-Q5V6-CHNAT

An 8GB DDR4 2666 ECC SODIMM module for HP microserver and workstation upgrades

  • Capacity8GB
  • Type260-Pin DDR4 SO-DIMM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.20V
  • ECCYes
  • 8GB capacity adds multitasking headroom for demanding workloads
  • ECC protection detects and corrects single-bit memory errors
  • DDR4 2666 speed moves data at PC4-21300 rates
  • 20V operation keeps power draw low in microserver builds
  • 260-pin SODIMM form factor fits HP L33265-001 compatible slots

Capacity and fit

This 8 GB DDR4 SODIMM is built as a direct replacement for the HP L33265-001 part number. It targets owners of compatible micro-servers, workstations or laptops that require ECC memory in the 260-pin SO-DIMM form factor.

Speed and voltage limits

The module runs at 2666 MHz (PC4-21300) with CL19 latency at the standard 1.20 V. DDR4 SO-DIMM slots that operate at lower frequencies will down-clock the stick, while platforms that do not support ECC cannot use the error-correction feature.

Build and daily handling

The stick is unbuffered and ships without a heat spreader, keeping the profile low for tight bays. Gold contacts on the 260-pin edge connector resist oxidation, and the single-rank 1Rx8 organisation simplifies population rules in multi-slot systems.

Kohokohdat

  • 8GB capacity adds multitasking headroom for demanding workloads
  • ECC protection detects and corrects single-bit memory errors
  • DDR4 2666 speed moves data at PC4-21300 rates
  • 20V operation keeps power draw low in microserver builds
  • 260-pin SODIMM form factor fits HP L33265-001 compatible slots

Tekniset tiedot

BrandA-Tech
SeriesCompatible Replacement for HP
ModelL33265-001
Capacity8GB
Type260-Pin DDR4 SO-DIMM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Heat SpreaderNo
FeaturesL33265-001
Recommend UseCompatible Replacement for HP L33265-001

Kysymyksiä tästä tuotteesta

Should I choose the single 8GB ECC SODIMM or add another for dual-channel?

This listing is a single 8GB module. Install two identical sticks to run dual-channel on a board that supports it.

What does the 2666MHz rating deliver in an HP Microserver?

The module runs at 2666 MT/s (PC4-21300) with CL19 latency at 1.20V, giving the rated throughput when the platform enables that speed.

Does the 260-pin ECC SODIMM fit standard DDR4 laptop slots?

Yes, it uses the 260-pin DDR4 SO-DIMM form factor and is an unbuffered ECC type, so it fits slots wired for that specification.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.