Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green 288-pin DDR4 UDIMM with black memory chips and silver contacts

A-Tech

A-Tech 8GB DDR4 2666 ECC UDIMM 1Rx8 CL19 Server Memory

SKU CH-5AX3-V6EQ9

An 8 GB DDR4 2666 ECC UDIMM module with CL19 latency, 1.20 V operation and a 1Rx8 layout on 288 pins

  • Capacity8GB
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ECC protection guards data integrity on servers
  • 2666 MHz DDR4 speed handles heavy workloads
  • CL19 latency keeps response times tight
  • 20 V operation reduces power draw and heat
  • 1Rx8 single-rank layout aids compatibility with dense configs

8GB DDR4 ECC UDIMM for Servers

This 8GB DDR4 2666 ECC UDIMM module is built for server and workstation systems that require error-correcting memory. It operates at 1.20V with a CAS latency of CL19 and uses a single-rank 1Rx8 organisation. The 288-pin DIMM is a direct replacement for several Kingston part numbers.

DDR4 2666 Speed and Unbuffered Design

The module runs at the DDR4 2666 (PC4-21300) data rate, which is the maximum speed supported by this standard. Because it is unbuffered ECC, it cannot be mixed with registered or load-reduced DIMMs in the same system. The memory controller must support ECC UDIMM operation at this frequency for the module to function correctly.

Check Motherboard ECC UDIMM Support Before Ordering

Verify that your motherboard or server platform explicitly supports ECC unbuffered DDR4 DIMMs at 2666MHz. Systems that only accept registered ECC or non-ECC memory will not work with this module. Confirm the maximum supported capacity per slot and the total number of available 288-pin slots in your chassis.

Kohokohdat

  • ECC protection guards data integrity on servers
  • 2666 MHz DDR4 speed handles heavy workloads
  • CL19 latency keeps response times tight
  • 20 V operation reduces power draw and heat
  • 1Rx8 single-rank layout aids compatibility with dense configs

Tekniset tiedot

BrandA-Tech
Capacity8GB
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Kysymyksiä tästä tuotteesta

Should I pick a 1Rx8 or 2Rx8 module for my server?

This module is a single-rank 1Rx8 design, which places less electrical load on the memory controller and is often preferred for maximum slot population.

What does the 2666 MHz rating deliver once installed?

The module runs at DDR4 2666 MHz with CL19 latency, providing 21300 MB/s peak bandwidth for server and workstation workloads.

How does the ECC UDIMM interface affect compatibility?

It uses a standard 288-pin DDR4 DIMM slot with ECC unbuffered signalling; the system must support ECC UDIMM memory for error correction to function.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.