Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green rectangular DDR4 DIMM with black chips on a gold edge connector

A-Tech

A-Tech 8GB DDR4 2666MHz CL19 Desktop Memory

SKU CH-9V18-SY7Z8

8GB DDR4 2666MHz CL19 desktop memory module with 1.20V unbuffered 288-pin DIMM design for AMD and Intel systems

  • Capacity8GB
  • SpeedDDR4 2666 (PC4 21300)
  • Tested Frequency2666
  • CAS LatencyCL19
  • Voltage1.20V
  • ECCNo
  • 8GB capacity adds headroom for multitasking and heavier workloads
  • DDR4 2666MHz speed moves data at PC4-21300 rates for responsive everyday computing
  • CL19 latency at 1.20V balances quick access with standard DDR4 power draw
  • 288-pin unbuffered DIMM fits mainstream desktop motherboards without ECC or registration
  • Major-brand chips tested through quality assurance for dependable long-term operation

8GB DDR4 2666MHz Desktop Memory

This 8GB DDR4 module runs at 2666MHz with CL19 latency and 1.20V operation. It uses a 288-pin DIMM form factor and unbuffered, non-ECC design. The kit suits desktop owners who need a straightforward capacity increase for everyday workloads.

Verify DDR4 DIMM slot and 2666MHz support

Before ordering, confirm your motherboard accepts DDR4 DIMMs and can run at 2666MHz. Check that the board supports unbuffered, non-ECC modules at 1.20V. Consult the system manual or vendor specification sheet to ensure the memory controller handles this speed and timing.

Replaces Kingston KVR26N19S8/8 and HP26D4U9S8ME-8

This module is a compatible equivalent for the Kingston KVR26N19S8/8 and HP26D4U9S8ME-8 parts. The upgrade makes sense when your system currently runs less than 8GB or uses slower DDR4, and the platform supports 2666MHz CL19 operation.

Kohokohdat

  • 8GB capacity adds headroom for multitasking and heavier workloads
  • DDR4 2666MHz speed moves data at PC4-21300 rates for responsive everyday computing
  • CL19 latency at 1.20V balances quick access with standard DDR4 power draw
  • 288-pin unbuffered DIMM fits mainstream desktop motherboards without ECC or registration
  • Major-brand chips tested through quality assurance for dependable long-term operation

Tekniset tiedot

BrandA-Tech
Capacity8GB
SpeedDDR4 2666 (PC4 21300)
Tested Frequency2666
CAS LatencyCL19
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chips
FeaturesMajor Brand Chipset
Recommend UseAMD & Intel Compatible

Kysymyksiä tästä tuotteesta

What comes inside the package and what must be purchased separately?

The package contains one 8GB DDR4 2666MHz CL19 288-pin DIMM running at 1.20V. No extra cables or brackets are included; additional modules for dual-channel operation must be bought separately.

How do I decide between this single 8GB module and a larger capacity kit?

Choose this single 8GB stick when your board has a free slot and you only need a modest capacity increase; select a higher-capacity kit if your workload demands more than 8GB total or if you want matched modules for dual-channel performance.

What does the 2666MHz rating mean once the stick is installed?

The module will run at 2666MHz with CL19 timing at the standard 1.20V DDR4 voltage, delivering PC4-21300 bandwidth provided the motherboard supports that speed and the BIOS is set accordingly.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.