Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green rectangular circuit board with gold edge connectors and black memory chips

A-Tech

A-Tech 8GB DDR4 2666MHz ECC UDIMM 1Rx8 Server RAM

SKU CH-M7V9-4SFAR

8GB DDR4 2666MHz ECC unbuffered UDIMM with CL19 latency for HP L43768-001 and L36845-001 servers

  • Capacity8GB
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ECC protection guards data integrity in server workloads
  • 2666 MHz DDR4 speed handles demanding applications
  • 2 V operation reduces power draw
  • 288-pin UDIMM fits standard server slots
  • Compatible replacement for HP part numbers L43768-001 and L36845-001

8GB DDR4 2666MHz ECC UDIMM

This 8GB DDR4 2666MHz ECC UDIMM module provides error-correcting memory for servers and workstations that require data integrity. It operates at 1.20V with a CAS latency of CL19 and uses a 1Rx8 rank configuration. The module is a compatible replacement for HP part numbers L43768-001 and L36845-001.

288-pin DIMM installation

Installation follows the standard 288-pin DIMM form factor used in compatible DDR4 server platforms. The unbuffered design allows direct connection to the memory controller without a register chip. Verify your system supports ECC unbuffered memory before purchase, as registered or non-ECC modules are not interchangeable with this specification.

DDR4 2666MHz platform limits

The DDR4 2666MHz interface caps memory bandwidth at the PC4-21300 rating for this module. System maximum capacity and supported module population depend on the specific platform memory controller and BIOS, which are not defined by this module alone. Mixed speeds will default to the lowest common frequency across all installed DIMMs.

Kohokohdat

  • ECC protection guards data integrity in server workloads
  • 2666 MHz DDR4 speed handles demanding applications
  • 2 V operation reduces power draw
  • 288-pin UDIMM fits standard server slots
  • Compatible replacement for HP part numbers L43768-001 and L36845-001

Tekniset tiedot

BrandA-Tech
SeriesCompatible Replacement for HP
ModelL43768-001, L36845-001
Capacity8GB
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor Brand Chipset
FeaturesL43768-001, L36845-001

Kysymyksiä tästä tuotteesta

How do I confirm the 8GB DDR4 2666MHz ECC UDIMM is operating correctly after installation?

The system should POST and report the full 8GB capacity. Run a memory diagnostic tool to check for errors and verify the module is detected as ECC unbuffered at CL19.

What is included with the A-Tech 8GB DDR4 2666MHz ECC UDIMM and what must be purchased separately?

The box contains one 8GB DDR4 2666MHz ECC UDIMM module (1Rx8, 1.2V, CL19). No cables, brackets, or additional components are included.

Which version of the A-Tech 8GB DDR4 2666MHz ECC UDIMM should I choose for my HP server?

This module replaces HP part numbers L43768-001 and L36845-001. Select it if your system requires a 288-pin DDR4 2666MHz ECC unbuffered DIMM.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.