Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green printed circuit board with black memory chips and gold edge connectors, standard desktop DIMM shape

A-Tech

A-Tech 8GB DDR4 2933MHz CL21 1.2V Desktop RAM

SKU CH-EPGZ-7AR8V

8GB DDR4 2933MHz CL21 1.2V desktop DIMM module for Kingston KVR29N21S8/8 replacement

  • Capacity8GB
  • SpeedDDR4 2933 (PC4 23400)
  • Tested Frequency2933
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCNo
  • 8GB DDR4 capacity speeds up multitasking and heavy workloads
  • 2933MHz tested frequency delivers fast data transfer rates
  • CL21 latency provides responsive system performance
  • 20V standard voltage ensures efficient power consumption
  • 288-pin DIMM form factor fits compatible desktop motherboards

A-Tech 8GB DDR4 2933MHz Desktop RAM

This 8GB DDR4 module runs at 2933MHz with CL21 latency and 1.20V operation. It is an unbuffered non-ECC DIMM built for desktop systems that accept PC4-23400 memory. The stick uses a 288-pin layout and a 1Rx8 organisation with major-brand chips.

Direct replacement for Kingston KVR29N21S8/8

The module matches the Kingston KVR29N21S8/8 specification exactly, so it drops into any board qualified for that part number. Swapping an older slower stick or adding a second identical module gives the full bandwidth the platform expects. The upgrade is worth it when your current memory limits multitasking or leaves free slots unused.

Simple press-in installation on a 288-pin slot

Align the notch with the key in the motherboard socket and press evenly until the retention clips click. The most common issue is seating the module incompletely, which causes a no-post or single-channel boot. Verify the system memory list before purchase because some OEM boards restrict supported part numbers.

Kohokohdat

  • 8GB DDR4 capacity speeds up multitasking and heavy workloads
  • 2933MHz tested frequency delivers fast data transfer rates
  • CL21 latency provides responsive system performance
  • 20V standard voltage ensures efficient power consumption
  • 288-pin DIMM form factor fits compatible desktop motherboards

Tekniset tiedot

BrandA-Tech
SeriesCompatible Replacement for Kingston
ModelKVR29N21S8/8
Capacity8GB
SpeedDDR4 2933 (PC4 23400)
Tested Frequency2933
CAS LatencyCL21
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesKVR29N21S8/8
Recommend UseCompatible Replacement for Kingston KVR29N21S8/8

Kysymyksiä tästä tuotteesta

Does this module fit a standard 288-pin DDR4 DIMM slot?

Yes, it uses the 288-pin DDR4 DIMM form factor required by desktop motherboards.

What is the correct way to seat the stick so the retention clips lock?

Align the notch with the slot key, press down firmly until both side clips snap into place automatically.

Will the memory chips or PCB need cleaning or replacement over time?

No scheduled maintenance is required; the module has no moving parts and operates at standard 1.2V.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.