Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green 288-pin DDR4 DIMM module with black chips

A-Tech

A-Tech 8GB DDR4 3200MHz CL22 1Rx8 Kingston replacement desktop RAM

SKU CH-WHGV-1RMV0

8GB DDR4 DIMM running at 3200MHz with CL22 latency, 1.2V operation, and Kingston HX432C16FB3/8, KCP432NS8/8, KF432C16BB/8, KVR32N22S8/8 compatibility

  • Capacity8GB
  • SpeedDDR4 3200 (PC4 25600)
  • Tested Frequency3200
  • CAS LatencyCL22
  • Voltage1.20V
  • ECCNo
  • 8GB capacity handles heavier workloads and multitasking
  • DDR4 3200MHz speed delivers fast data transfer rates
  • CL22 latency provides responsive memory access timing
  • 2V standard voltage ensures efficient power consumption
  • 288-pin DIMM form factor fits standard desktop motherboard slots

8GB DDR4 3200MHz CL22 Desktop Memory

This A-Tech module provides 8GB of DDR4 memory at 3200MHz with CL22 latency. It uses a standard 1.2V unbuffered DIMM form factor with 288 pins. The kit is a direct replacement for several Kingston part numbers including KVR32N22S8/8 and KCP432NS8/8.

Suits standard desktop upgrades.

This memory suits owners of desktop PCs that accept non-ECC unbuffered DDR4 DIMMs and want a straightforward capacity increase. It is not suitable for servers or workstations that require ECC registered modules or for laptops needing SO-DIMM form factors.

CL22 latency at 3200MHz decides fit

The CAS latency of CL22 at the rated 3200MHz speed is the key specification to verify against your motherboard's supported memory timings. Systems tuned for lower latency kits may not gain the expected responsiveness from this module.

Kohokohdat

  • 8GB capacity handles heavier workloads and multitasking
  • DDR4 3200MHz speed delivers fast data transfer rates
  • CL22 latency provides responsive memory access timing
  • 2V standard voltage ensures efficient power consumption
  • 288-pin DIMM form factor fits standard desktop motherboard slots

Tekniset tiedot

BrandA-Tech
Capacity8GB
SpeedDDR4 3200 (PC4 25600)
Tested Frequency3200
CAS LatencyCL22
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chips
FeaturesMajor Brand Chipset
Recommend UseAMD & Intel Compatible

Kysymyksiä tästä tuotteesta

How can I confirm the module is running at the tested 3200 speed and CL22 latency after installation?

Open Task Manager or a hardware monitor and check that the reported speed reads 3200 MT/s and the timings show 22-22-22; the SPD table on the DIMM also lists PC4-25600 and CL22 as the default profile.

What does the package contain and is anything else required to use this memory?

The box holds one 8 GB DDR4 UDIMM built with major-brand chips; no extra cables, brackets or software are needed — just a free 288-pin DIMM slot on a desktop motherboard that accepts 1.2 V non-ECC memory.

Which version should I pick if my system lists Kingston KVR32N22S8/8 or KCP432NS8/8 as supported parts?

This A-Tech module is a direct equivalent for both of those Kingston part numbers, so the single 8 GB 3200 MHz CL22 DIMM listed here is the correct choice.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.