Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green 288-pin DDR4 RDIMM module with black chips and gold contacts

A-Tech

A-Tech 8GB DDR4 3200MHz ECC Registered RDIMM 1Rx8 CL22 1.2V Supermicro Certified MEM-DR480LB-ER32

SKU CH-AFCG-EGR2B

8GB DDR4 3200MHz ECC Registered RDIMM, CL22 1.2V, Supermicro certified with Hynix chips

  • Capacity8GB
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL22
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • Supermicro certified for validated server compatibility
  • ECC registered design protects data integrity under load
  • Single-rank 1Rx8 layout optimises signal timing
  • Standard 1.2 V DDR4 voltage reduces power draw
  • 3200 MHz CL22 speed delivers responsive throughput

8GB DDR4 3200 ECC Registered RDIMM

This 8GB DDR4 3200MHz ECC Registered RDIMM is built for servers and workstations that require error-correcting memory. The module operates at 1.2V with CL22 latency and uses a 1Rx8 single-rank configuration. It carries Supermicro certification for validated compatibility with qualified platforms.

Suited for ECC platforms only

This module fits systems that accept DDR4 288-pin RDIMMs with ECC Registered support. It will not work in desktop boards that require unbuffered non-ECC UDIMMs. Buyers who need higher density per slot or a different rank organisation should verify their platform’s qualified vendor list before purchasing.

Supermicro certified MEM-DR480LB-ER32

The Supermicro certification on part number MEM-DR480LB-ER32 confirms this module has passed the vendor’s validation process. That certification is the primary indicator of whether the DIMM will be recognised and supported by the target server or workstation.

Kohokohdat

  • Supermicro certified for validated server compatibility
  • ECC registered design protects data integrity under load
  • Single-rank 1Rx8 layout optimises signal timing
  • Standard 1.2 V DDR4 voltage reduces power draw
  • 3200 MHz CL22 speed delivers responsive throughput

Tekniset tiedot

BrandSuperMicro
SeriesSupermicro Certified
ModelMEM-DR480LB-ER32
Capacity8GB
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL22
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor Brand Chipset
FeaturesSupermicro Certified MEM-DR480LB-ER32 (HMA81GR7CJR8N-XN)

Kysymyksiä tästä tuotteesta

What motherboard slot and chipset support does this 288-pin DDR4 RDIMM require?

This module fits a 288-pin DDR4 RDIMM slot and needs a platform that supports registered ECC memory at 1.2V.

Will this CL22 registered ECC module run reliably alongside existing DDR4 RDIMMs of different speeds or ranks?

The motherboard will clock all modules to the lowest common speed and matched timings; mixing ranks is supported if the platform allows it.

How can I confirm the module is operating at 3200MHz with ECC active after installation?

Enter the system BIOS or use an OS-level utility to verify the reported speed shows 3200MHz and ECC status reads enabled.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.