Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green printed circuit board with black memory chips, no heat spreader, 288-pin DDR5 DIMM

A-Tech

A-Tech 8GB DDR5 4800 CL40 desktop RAM

SKU CH-V1WA-N2493

An 8 GB DDR5 desktop module running at 4800 MHz with CL40 latency and 1.1 V operation for standard DIMM slots

  • Capacity8GB
  • SpeedDDR5 4800 (PC5 38400)
  • Tested Frequency4800
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCNo
  • 8GB capacity lets you multitask smoothly with a single DDR5 4800 module
  • CL40 latency at 4800 MHz delivers responsive desktop performance
  • 10V standard voltage keeps power draw low for DDR5 systems
  • 288-pin unbuffered DIMM fits standard desktop memory slots
  • Tested with major-brand chips for dependable operation

8GB DDR5 4800 CL40 desktop module

This A-Tech module delivers 8GB of DDR5 memory at 4800 MT/s with a CL40 latency and 1.10V operating voltage. It is an unbuffered, non-ECC DIMM built for desktop systems that support the DDR5 standard. The 1Rx16 organisation keeps the design simple for mainstream platforms.

Sustained-load behaviour

At the rated 4800 MT/s the module runs at the standard 1.10V, so power draw and heat output remain predictable during long work sessions. Without a heat spreader the DRAM relies on case airflow, which is sufficient for the JEDEC base specification under continuous multi-tasking or background rendering workloads.

Replaces ADATA DDR5 4800 8GB DIMMs

The part is a direct drop-in for ADATA models AD5U48008G-DT, AD5U48008G-R, AD5U48008G-S and AX5U4800C408G-BB10. The upgrade is worth it when an existing system has empty slots or lower-capacity sticks and the motherboard and CPU both support DDR5 4800 operation.

Kohokohdat

  • 8GB capacity lets you multitask smoothly with a single DDR5 4800 module
  • CL40 latency at 4800 MHz delivers responsive desktop performance
  • 10V standard voltage keeps power draw low for DDR5 systems
  • 288-pin unbuffered DIMM fits standard desktop memory slots
  • Tested with major-brand chips for dependable operation

Tekniset tiedot

BrandA-Tech
SeriesCompatible Replacement for ADATA
ModelAD5U48008G-DT, AD5U48008G-R, AD5U48008G-S, AX5U4800C408G-BB10
Capacity8GB
SpeedDDR5 4800 (PC5 38400)
Tested Frequency4800
CAS LatencyCL40
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesAD5U48008G-DT, AD5U48008G-R, AD5U48008G-S, AX5U4800C408G-BB10
Recommend UseCompatible Replacement for ADATA AD5U48008G-DT, AD5U48008G-R, AD5U48008G-S, AX5U4800C408G-BB10

Kysymyksiä tästä tuotteesta

How much power does the 1.10 V DDR5 4800 module draw when the system runs all day?

The module operates at the standard DDR5 voltage of 1.10 V. Without a heat spreader it relies on case airflow, so typical power draw stays low during continuous use.

What motherboard slot and memory controller does my desktop need for this 288-pin DDR5 DIMM?

A DDR5-compatible desktop motherboard with a 288-pin DIMM slot and a memory controller that supports 4800 MT/s at CL40 is required.

Will this CL40 4800 MHz stick run stably alongside an older DDR5 module rated at a lower speed?

The system will down-clock all installed DDR5 memory to the lowest common speed and highest latency, so a slower module forces this stick to run at that reduced rate.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.