NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
A-Tech
A 128 GB DDR4 2666 MHz LRDIMM with ECC and octal-rank 3DS/TSV architecture for high-density server workloads
This Supermicro certified 128GB DDR4 2666MHz LRDIMM module targets servers and workstations that require maximum memory capacity per slot. The octal-rank design uses Micron 3DS TSV chips to reach 128GB in a single 288-pin package. ECC load-reduced operation helps maintain data integrity in dense configurations.
Load-reduced buffering reduces electrical load on the memory controller, allowing the module to sustain 2666MHz throughput under continuous multi-threaded workloads. The 1.20V operating voltage and CL19 latency support stable operation during extended compute or virtualisation tasks without thermal throttling.
Verify that your motherboard supports DDR4 LRDIMM modules and the 2S4Rx4 octal-rank organisation before ordering. Confirm the maximum supported capacity per slot and total system capacity in the vendor documentation. Ensure the BIOS revision lists this module or the Micron MTA144ASQ16G72LSZ-2S6E1 part number as qualified.
| Brand | SuperMicro |
|---|---|
| Series | Supermicro Certified |
| Model | MEM-DR412L-CL02-LR26 |
| Capacity | 128GB |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 2S4Rx4 (8Rx4) |
| Chipset | Micron Chipset |
| Features | Supermicro Certified MEM-DR412L-CL02-LR26 (MTA144ASQ16G72LSZ-2S6E1) |
The module runs at the standard DDR4 voltage of 1.20V. As a Load Reduced DIMM, it reduces electrical load on the memory bus, which helps manage power draw in dense configurations. Actual wattage depends on your specific server workload and configuration.
You need a server motherboard with DDR4 288-pin DIMM slots and a CPU memory controller that supports Load Reduced DIMMs and octal-rank (8Rx4) modules. The platform must also support ECC and the PC4-21300 speed grade for full operation.
Mixing Load Reduced DIMMs with standard Registered DIMMs is not supported on any platform. All populated slots must use the same memory technology. Check your system manual for supported population rules with 8Rx4 LRDIMMs.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?