Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green 240-pin DDR3 RDIMM module with black chips and gold contacts

A-Tech

A-Tech Supermicro Certified 16GB DDR3 1866MHz ECC RDIMM 2Rx4 240-Pin Server RAM

SKU CH-MA01-N86Z0

16 GB DDR3 1866 MHz ECC registered DIMM with 2Rx4 organisation and CL13 latency for Supermicro servers

  • Capacity16GB
  • SpeedDDR3 1866 (PC3 14900)
  • CAS LatencyCL13
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • Supermicro certified for validated server compatibility
  • 16 GB capacity expands memory for heavy workloads
  • DDR3 1866 MHz speed accelerates data throughput
  • ECC registered design protects data integrity
  • 5 V standard voltage ensures stable operation

Supermicro Certified Server Memory

This 16 GB DDR3 1866 MHz registered ECC module is built for Supermicro platforms that require validated memory. It targets administrators upgrading or repairing compatible servers and workstations where error-correcting registered DIMMs are mandatory for stable operation.

Registered ECC 240-Pin RDIMM

The 240-pin RDIMM form factor fits DDR3 server slots that accept registered modules. The dual-rank 2Rx4 organisation and CL13 latency at 1.50 V allow the memory controller to manage signal integrity across populated channels without adding unbuffered load to the platform.

16 GB PC3-14900 Capacity Headroom

A single 16 GB stick raises total memory in supported configurations, improving multi-tasking and virtual-machine density. The module reaches its limit when the platform's maximum DIMM count or total memory ceiling is met, requiring additional slots or higher-density parts to scale further.

Kohokohdat

  • Supermicro certified for validated server compatibility
  • 16 GB capacity expands memory for heavy workloads
  • DDR3 1866 MHz speed accelerates data throughput
  • ECC registered design protects data integrity
  • 5 V standard voltage ensures stable operation

Tekniset tiedot

BrandSuperMicro
SeriesSupermicro Certified
ModelMEM-DR316L-HL02-ER18
Capacity16GB
SpeedDDR3 1866 (PC3 14900)
CAS LatencyCL13
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesSupermicro Certified MEM-DR316L-HL02-ER18 (HMT42GR7BFR4C-RD)

Kysymyksiä tästä tuotteesta

Does the CL13 CAS latency become the bottleneck during long compute runs?

CL13 is the rated timing at 1866 MHz; sustained workloads will see the same latency unless the system downclocks the module.

How much heat does the 1.5 V registered DIMM produce in a fully populated server running 24/7?

Registered DDR3 at 1.5 V typically draws a few watts per module; total heat scales with the number of populated slots.

What motherboard feature must already be present for this ECC RDIMM to function?

The board must support DDR3 ECC registered memory and provide 240-pin RDIMM slots.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.