Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green circuit board with black memory chips, 288 gold pins, no heat spreader, single 16GB DDR5 module

A-Tech

A-Tech Supermicro Certified 16GB DDR5 4800MHz CL40 1.1V Non-ECC DIMM 288-Pin Desktop RAM

SKU CH-NGX0-2R6D3

Certified 16GB DDR5 4800MHz CL40 1.1V non-ECC DIMM for Supermicro desktop systems

  • Capacity16GB
  • SpeedDDR5 4800 (PC5 38400)
  • Tested Frequency4800
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCNo
  • Supermicro-certified for guaranteed system compatibility
  • 16 GB DDR5 capacity handles heavier multitasking loads
  • 4800 MHz rated speed delivers fast data throughput
  • Low 1.10 V operation reduces power draw
  • Micron chipset ensures reliable module quality

Supermicro Certified 16GB DDR5 Module

This 16GB DDR5 DIMM carries Supermicro certification and uses Micron chips to deliver 4800MHz speed at CL40 latency. It is built for desktop systems that require non-ECC unbuffered memory running at the standard 1.1V voltage.

Simple 288-Pin DIMM Installation

The module fits a standard 288-pin DDR5 slot and needs no extra configuration beyond seating it firmly until the latches click. Common issues arise when the motherboard BIOS has not been updated for DDR5 4800 support or when mixed memory kits prevent the system from training at the rated speed.

Verify DDR5 Slot And Voltage Support

Before ordering, confirm your motherboard provides a DDR5 288-pin slot and can operate memory at 1.1V without manual voltage changes. Check the vendor’s qualified vendor list for the MEM-DR516L-CL01-UN48 part number to ensure the platform accepts this specific 16GB density.

Kohokohdat

  • Supermicro-certified for guaranteed system compatibility
  • 16 GB DDR5 capacity handles heavier multitasking loads
  • 4800 MHz rated speed delivers fast data throughput
  • Low 1.10 V operation reduces power draw
  • Micron chipset ensures reliable module quality

Tekniset tiedot

BrandSuperMicro
SeriesSupermicro Certified
ModelMEM-DR516L-CL01-UN48
Capacity16GB
SpeedDDR5 4800 (PC5 38400)
Tested Frequency4800
CAS LatencyCL40
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMicron Chipset
Heat SpreaderNo
FeaturesSupermicro Certified MEM-DR516L-CL01-UN48 (MTC8C1084S1UC48BA1)
Recommend UseCompatible Supermicro Systems

Kysymyksiä tästä tuotteesta

How can I confirm the module is running at the certified 4800 speed and CL40 latency after installation?

Open the BIOS or a tool such as CPU-Z and verify the memory frequency reads 4800 MT/s with timings showing CL40.

What ships in the package and is any extra hardware required for installation?

The box contains one 16 GB DDR5 DIMM; no heat spreader, cables or additional parts are included or needed.

Which capacity and speed version should I choose for a Supermicro system that lists MEM-DR516L-CL01-UN48 as supported?

Select this 16 GB DDR5 4800 module; it matches the exact Supermicro part number and voltage of 1.1 V.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.