Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green 288-pin DDR4 RDIMM with black Samsung chips, 32GB registered ECC module

A-Tech

A-Tech Supermicro Certified 32GB DDR4 2933MHz CL21 ECC Registered RDIMM 2Rx4 288-Pin Server Memory

SKU CH-6JDZ-650FP

32 GB DDR4 2933 MHz ECC registered RDIMM, CL21 1.20 V, Supermicro certified with Samsung chips

  • Capacity32GB
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • Supermicro certified for validated server compatibility
  • Samsung DDR4 chips deliver 2933 MHz registered ECC performance
  • 32 GB dual-rank module expands memory capacity efficiently
  • 20 V standard voltage reduces power draw per module
  • 288-pin RDIMM form factor fits compatible server slots

Certified Server Memory

This A-Tech module is a 32GB DDR4 2933MHz CL21 ECC Registered RDIMM built for Supermicro platforms. It uses Samsung chips and carries the MEM-DR432LC-ER29 qualification for direct compatibility. The single stick adds capacity to servers and workstations that require registered error-correcting memory. Installation is a standard 288-pin DIMM insertion.

Registered ECC Requirement

The decisive specification is the Registered ECC RDIMM design with 2Rx4 organisation. Systems that accept only unbuffered UDIMMs or non-ECC modules cannot use this stick. Buyers must confirm their motherboard or server documentation lists support for registered ECC DDR4 at 2933MHz before ordering. Voltage is 1.20V, matching the DDR4 standard.

Suited for Qualified Supermicro Builds

This module suits administrators expanding qualified Supermicro servers or replacing failed sticks in validated configurations. It is not for desktop PCs, laptops or consumer motherboards that lack registered ECC support. Builders needing unbuffered memory, higher speeds or larger single-module capacities should look elsewhere.

Kohokohdat

  • Supermicro certified for validated server compatibility
  • Samsung DDR4 chips deliver 2933 MHz registered ECC performance
  • 32 GB dual-rank module expands memory capacity efficiently
  • 20 V standard voltage reduces power draw per module
  • 288-pin RDIMM form factor fits compatible server slots

Tekniset tiedot

BrandSuperMicro
SeriesSupermicro Certified
ModelMEM-DR432LC-ER29
Capacity32GB
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetSamsung Chipset
FeaturesSupermicro Certified MEM-DR432LC-ER29 (M393A4K40DB2-CVF)

Kysymyksiä tästä tuotteesta

What does 2933 MHz mean once this module is installed in a server?

The module runs at DDR4 2933 speed, delivering PC4-23400 bandwidth so the memory controller can move data at that rate when the platform supports it.

How does the 288-pin RDIMM interface limit what this memory can do?

The 288-pin RDIMM form factor fits registered DIMM slots and the registered buffer lets the memory controller address 2Rx4 ranks reliably at 1.20 V.

What physical space and slot type are needed to mount this 32 GB stick?

It requires a standard DDR4 288-pin RDIMM slot and the module height matches regular server DIMM clearance.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.