Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green printed circuit board with black memory chips and gold edge connectors

A-Tech

A-Tech Supermicro Certified 8GB DDR3 1600 ECC Registered RDIMM 2Rx4

SKU CH-BKMC-HV0WS

Server memory module adds 8 GB of DDR3-1600 ECC registered capacity with CL11 latency and 1.5 V operation

  • Capacity8GB
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • Supermicro certified for guaranteed server compatibility
  • 8 GB DDR3 1600 MHz registered ECC module
  • Dual-rank 2Rx4 organisation for higher density
  • CL11 latency at standard 1.5 V operation
  • 240-pin RDIMM form factor fits approved platforms

Certified server memory for Supermicro platforms

This 8 GB DDR3-1600 RDIMM carries Supermicro certification and uses Hynix chips in a 2Rx4 registered ECC layout. It targets administrators who need validated modules for compatible Supermicro servers and workstations. The module runs at standard 1.50 V with CL11 latency.

Registered ECC and dual-rank organisation

Error-correcting code and registered signalling protect data integrity in multi-module configurations. The 2Rx4 dual-rank design lets the memory controller address two logical ranks per module, increasing density per slot without changing the 240-pin form factor.

240-pin RDIMM build for rack-mount density

The registered DIMM format fits standard DDR3 server slots and presents a low-profile height suited to 1U and 2U chassis. Gold-plated edge contacts resist oxidation during long deployments. Buyers who need unbuffered UDIMMs or higher-capacity LRDIMMs should verify their platform requirements before ordering.

Kohokohdat

  • Supermicro certified for guaranteed server compatibility
  • 8 GB DDR3 1600 MHz registered ECC module
  • Dual-rank 2Rx4 organisation for higher density
  • CL11 latency at standard 1.5 V operation
  • 240-pin RDIMM form factor fits approved platforms

Tekniset tiedot

BrandSuperMicro
SeriesSupermicro Certified
ModelMEM-DR380L-HL02-ER16
Capacity8GB
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesSupermicro Certified MEM-DR380L-HL02-ER16 (HMT31GR7CFR4C-PB)

Kysymyksiä tästä tuotteesta

Will the 1.50V DDR3 RDIMM need any firmware updates or capacitor replacements over its service life?

No firmware or capacitor maintenance is required; the module is a solid-state DRAM DIMM validated at 1.50 V for the lifetime of the server.

What thermal or voltage ceiling limits sustained throughput on this CL11 1600 MHz registered module?

The JEDEC 1.50 V ceiling and the CL11 timing budget are the first limits reached under continuous full-bandwidth load.

How much extra heat and power does the 2Rx4 ECC registered stick add when the server runs 24/7?

At 1.50 V the 8 GB dual-rank RDIMM draws only a few watts, adding minimal heat to the chassis airflow.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.