NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
A-Tech
8 GB DDR4 2400 MHz desktop memory module, CL17 latency, 1.2 V, 288-pin DIMM, Supermicro certified with Micron chips
This 8GB DDR4 2400 module is built for desktop systems that require Supermicro-validated memory. It is a single unbuffered non-ECC DIMM tested to run at 2400MHz with CL17 latency at 1.20V. The Micron chipset ensures dependable operation in compatible Supermicro platforms.
The decisive specification is the PC4-19200 rating at 2400MHz with CL17 timing and 1.20V operation. This exact combination determines whether the module matches the motherboard's qualified vendor list. Verify your system documentation for this speed, latency and voltage before ordering.
The package contains the qualified 288-pin DIMM without heat spreader or additional accessories. No software, cables or installation tools are included. The Supermicro certification and lifetime warranty from A-Tech cover the module itself and US-based technical support for compatibility questions.
| Brand | SuperMicro |
|---|---|
| Series | Supermicro Certified |
| Model | MEM-DR480L-CL02-UN24 |
| Capacity | 8GB |
| Speed | DDR4 2400 (PC4 19200) |
| Tested Frequency | 2400 |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Micron Chipset |
| Heat Spreader | No |
| Features | Supermicro Certified MEM-DR480L-CL02-UN24 (MTA8ATF1G64AZ-2G3B1) |
| Recommend Use | Compatible Supermicro Systems |
The module will run at 2400 MHz DDR4 speed, delivering a peak transfer rate of PC4-19200 in a compatible system.
DDR4 at 2400 MHz with CL17 timing sets the maximum bandwidth and access delay; actual throughput depends on the motherboard memory controller.
It needs a standard desktop DDR4 DIMM socket with a 288-pin keyed notch; the module has no heat spreader so it fits low-clearance boards.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?