Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green rectangular DDR4 RDIMM module with black memory chips and gold edge connectors

A-Tech

A-Tech Supermicro Certified MEM-DR432LC-ER26 32GB DDR4 2666MHz ECC RDIMM server RAM

SKU CH-KQ4M-EGJ7V

32 GB DDR4 2666 MHz ECC registered RDIMM module with Samsung chips, CL19 latency and 1.2 V operation

  • Capacity32GB
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • Supermicro certified for guaranteed server compatibility
  • Samsung DDR4 chips deliver 32GB at 2666MHz with CL19 latency
  • ECC registered dual-rank design protects data integrity under heavy loads
  • 20V standard voltage keeps power draw low in dense configurations
  • 288-pin RDIMM form factor fits approved Supermicro platforms

Supermicro Certified 32GB DDR4 ECC RDIMM

This 32GB DDR4 2666MHz module is built for servers and workstations that require ECC Registered memory. It suits administrators upgrading Supermicro platforms or compatible 288-pin RDIMM systems needing dependable capacity.

Standard 288-pin RDIMM installation

The module seats in a regular DDR4 RDIMM slot like any registered DIMM. ECC and registered operation require a motherboard and CPU that support both features; without that support the system will not post or will ignore the module.

32GB single-module capacity

One 32GB stick delivers the full rated density per slot. Buyers needing more total memory must add further modules of identical specification; systems limited to lower per-slot density cannot use this part.

Kohokohdat

  • Supermicro certified for guaranteed server compatibility
  • Samsung DDR4 chips deliver 32GB at 2666MHz with CL19 latency
  • ECC registered dual-rank design protects data integrity under heavy loads
  • 20V standard voltage keeps power draw low in dense configurations
  • 288-pin RDIMM form factor fits approved Supermicro platforms

Tekniset tiedot

BrandSuperMicro
SeriesSupermicro Certified
ModelMEM-DR432LC-ER26
Capacity32GB
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetSamsung Chipset
FeaturesSupermicro Certified MEM-DR432LC-ER26 (M393A4K40BB2-CTD)

Kysymyksiä tästä tuotteesta

How can I confirm the module is running at 2666 MHz with CL19 after installation?

Check the BIOS or UEFI memory information screen; it should report DDR4 2666 (PC4-21300) at 1.20 V with CAS latency 19 for the installed DIMM.

What exactly ships in the box and is any extra hardware required?

One 32 GB Samsung M393A4K40BB2-CTD 2Rx4 registered ECC RDIMM (288-pin) is included; no additional brackets, cables or heatsinks are needed for standard server DIMM slots.

Which capacity or version should I choose if my board supports PC4-21300 registered ECC?

This MEM-DR432LC-ER26 is a single 32 GB dual-rank module; select it when you need one 32 GB stick at 2666 MHz with Supermicro certification.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.