Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Rectangular metal crypto miner with two fans, low-noise home edition

AFRNDK

AFRNDK Antminer L3+ 55dB Low Noise Home Version 504MH/s 695W

SKU CH-G626-PZKXD

A Scrypt ASIC miner delivering 504 MH/s at 695 W with a 55 dB noise level for quiet home operation

  • Crypto AlgorithmScrypt
  • Compatible Currencylitcoin
  • Hashrate502Mh/s
  • Noise level55dB
  • Fan2
  • Power Consumption695W
  • Mines quietly at 55 dB so you can run it at home without disturbing neighbours
  • Draws 695 W at the wall while delivering 504 MH/s for efficient Scrypt mining
  • Includes a 100–240 V power supply and cord for plug-and-play setup worldwide
  • Uses 288 BM1485 ASIC chips across four hash boards for stable 502 MH/s performance
  • Operates reliably from 0 °C to 40 °C with dual fans and dedicated firmware

Home-Ready Scrypt ASIC Miner

The AFRNDK Antminer L3+ is a Scrypt algorithm ASIC built for Litecoin and Dogecoin mining at 504 MH/s. It draws 695 W at the wall and uses Bitmain BM1485 chips across four hashing boards. The unit is aimed at residential users who need a quieter alternative to standard data-centre miners.

Optimised Cooling and Integrated PSU

Meta space has reworked the cooling so noise drops from 80 dB to 55 dB at 25 °C, making it barely audible through a closed door. Two fans maintain airflow while the included power supply accepts 100–240 V input and delivers 11.60–13.00 V DC to the boards. Dedicated firmware keeps operation stable.

Pre-Purchase Checks

Confirm your electrical circuit can sustain 695 W continuous load with 10 % headroom. Verify an Ethernet port is available for the wired network connection. Ensure the operating environment stays between 0 °C and 40 °C. The unit contains 288 chips on four boards, so allow adequate space for intake and exhaust airflow.

Kohokohdat

  • Mines quietly at 55 dB so you can run it at home without disturbing neighbours
  • Draws 695 W at the wall while delivering 504 MH/s for efficient Scrypt mining
  • Includes a 100–240 V power supply and cord for plug-and-play setup worldwide
  • Uses 288 BM1485 ASIC chips across four hash boards for stable 502 MH/s performance
  • Operates reliably from 0 °C to 40 °C with dual fans and dedicated firmware

Tekniset tiedot

BrandBitmain
SeriesAntminer l3
Modell3+
Crypto AlgorithmScrypt
Compatible Currencylitcoin
Hashrate502Mh/s
Noise level55dB
Fan2
Power Consumption695W
Power Efficiency93.12 J/TH

Kysymyksiä tästä tuotteesta

Will this miner run on a standard UK 240 V socket?

Yes, the included power supply supports 100 V to 240 V input, so it works on a UK 240 V mains supply.

What is the expected noise level in a typical home room?

The optimised cooling system reduces noise to 55 dB at 25 °C ambient, compared with 80 dB for the standard unit, making it quiet enough for home use.

How many ASIC chips are inside and how are they arranged?

There are 288 BM1485 chips total, arranged as 72 chips on each of the four hashing boards.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.