Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Rectangular metal mining unit with front grille and four fans, matte grey finish

AFRNDK

AFRNDK Antminer S19 86T 86TH/s 3250W SHA-256 mining hardware

SKU CH-4J0T-R7HGA

SHA-256 ASIC miner delivers 86 TH/s at 3250 W with 34.5 J/TH efficiency, 76 dB noise and 220 V input

  • TypeMining Barebone System
  • Crypto AlgorithmSHA-256
  • Compatible CurrencyBitcoin (BTC)
  • Mining HardwareASIC
  • Hashrate86TH/S
  • Noise level76dB
  • 86 TH/s hashrate for high Bitcoin output
  • 5 J/TH efficiency lowers electricity cost per coin
  • 3250 W power draw at 25 °C wall measurement
  • 76 dB noise level with four integrated fans
  • 220 V input requirement protects hardware from damage

Bitcoin SHA-256 ASIC Miner

The AFRNDK Antminer S19 86T is an application-specific integrated circuit miner built for the SHA-256 algorithm used by Bitcoin. It delivers a nominal hashrate of 86 TH/s while drawing 3250 W at the wall. The unit operates on a 220 V supply and connects via 10/100 M RJ45 Ethernet. Four integrated fans produce a noise level of 76 dB.

Suited for dedicated mining operations

This hardware suits operators with access to 220 V power and adequate cooling for 3250 W of continuous heat. The 76 dB noise level and 16.0 kg weight make it impractical for residential or office environments. Buyers without industrial-grade electrical infrastructure or sound-isolated hosting should consider alternative arrangements.

86 TH/s with 34.5 J/TH efficiency

At the rated 86 TH/s the miner achieves 34.5 J/TH, meaning each terahash consumes roughly 34.5 joules. The 3250 W power draw sets a firm ceiling on density; a 10 kW circuit can support only three units with minimal headroom. Performance scales linearly until thermal limits or power capacity are reached.

Kohokohdat

  • 86 TH/s hashrate for high Bitcoin output
  • 5 J/TH efficiency lowers electricity cost per coin
  • 3250 W power draw at 25 °C wall measurement
  • 76 dB noise level with four integrated fans
  • 220 V input requirement protects hardware from damage

Tekniset tiedot

BrandANTMINER
SeriesS19
ModelS19 86T
TypeMining Barebone System
Crypto AlgorithmSHA-256
Compatible CurrencyBitcoin (BTC)
Mining HardwareASIC
Hashrate86TH/S
Noise level76dB
Fan4
Power Consumption3250w

Kysymyksiä tästä tuotteesta

What power supply does the Antminer S19 86T require to operate?

The miner requires a 220V input voltage; incorrect voltage can damage the unit.

Can I connect this miner using my existing 10/100M Ethernet switch?

Yes, the S19 86T uses a standard RJ45 Ethernet port rated at 10/100M for network connectivity.

How do I verify the Antminer S19 86T is hashing correctly after setup?

Check the dashboard for a reported hashrate of 86TH/s and power efficiency near 34.5 J/TH at 25°C.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.