Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Rectangular silver metal mining unit with four front fans and rear power sockets

AFRNDK

AFRNDK Antminer S19K Pro 110TH/s 2760W mining hardware

SKU CH-MVVZ-SKNA0

SHA-256 ASIC miner delivering 110 TH/s at 2760 W with four fans at 76 dB, 220 V input, 570 × 316 × 430 mm, 15.2 kg

  • TypeMining Barebone System
  • Crypto AlgorithmSHA-256
  • Compatible CurrencyBitcoin (BTC)
  • Mining HardwareASIC
  • Hashrate110TH/S
  • Noise level76dB
  • Delivers 110 TH/s SHA-256 hashrate for Bitcoin mining
  • Draws 2760 W for efficient power-to-performance balance
  • Runs at 76 dB with four integrated cooling fans
  • Operates on 220 V input within 0–40 °C ambient range
  • Compact 570 × 316 × 430 mm frame weighs 15.2 kg

What it is and who it is for

The AFRNDK Antminer S19K Pro is an ASIC miner built for the SHA-256 algorithm and compatible with Bitcoin and Bitcoin Cash. It delivers a nominal hashrate of 110 TH/s while drawing 2760 W. The unit is intended for operators who run dedicated mining infrastructure and can provide 220 V power.

Deciding specification: hashrate and power

At 110 TH/s with a 2760 W draw the efficiency works out to roughly 25 J/TH. That ratio determines whether the hardware meets your cost-per-terahash target and fits within your facility’s power budget and cooling capacity.

Who this suits and who should look elsewhere

The miner suits farms with 220 V supply, rack space for a 570 mm by 316 mm by 430 mm chassis, and tolerance for 76 dB noise from four fans. It is not suited for home or office environments, for sites limited to 110 V circuits, or for anyone mining algorithms other than SHA-256.

Kohokohdat

  • Delivers 110 TH/s SHA-256 hashrate for Bitcoin mining
  • Draws 2760 W for efficient power-to-performance balance
  • Runs at 76 dB with four integrated cooling fans
  • Operates on 220 V input within 0–40 °C ambient range
  • Compact 570 × 316 × 430 mm frame weighs 15.2 kg

Tekniset tiedot

BrandANTMINER
SeriesS19
ModelS19K PRO
TypeMining Barebone System
Crypto AlgorithmSHA-256
Compatible CurrencyBitcoin (BTC)
Mining HardwareASIC
Hashrate110TH/S
Noise level76dB
Fan4
Power Consumption2760W

Kysymyksiä tästä tuotteesta

What does 110 TH/s mean for daily Bitcoin output?

At 110 TH/s with a ±3 % tolerance the miner delivers roughly 110 trillion hashes every second; actual Bitcoin earnings depend on network difficulty and pool fees.

What does the RJ45 10/100M port limit in practice?

The Ethernet link caps at 100 Mbps, which is ample for stratum traffic but will not saturate a gigabit switch.

Will the 570 mm × 316 mm × 430 mm chassis fit a standard 19-inch rack?

The unit is 316 mm wide and 430 mm deep, so it fits a 19-inch rack shelf with at least 430 mm depth clearance.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.