Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Rectangular metal mining unit, matte grey finish, front grille and rear exhaust ports

AFRNDK

AFRNDK Avalon A1346 110TH/s 3300W mining hardware

SKU CH-M1PP-QKJ15

SHA-256 ASIC miner delivers 110 TH/s at 3300 W for Bitcoin, runs on 176–264 V input, and measures 306 × 405 × 442 mm with 75 dB noise

  • TypeMining Barebone System
  • Crypto AlgorithmSHA-256
  • Compatible CurrencyBitcoin (BTC)
  • Mining HardwareASIC
  • Hashrate110TH/S
  • Power Consumption3300W
  • 110 TH/s hashrate for strong Bitcoin mining performance
  • 3300 W power draw at the wall for energy planning
  • 220 V input requirement protects the unit from damage
  • 75 dB noise level suits dedicated mining spaces
  • 8 kg weight on a 306 x 405 x 442 mm frame for rack mounting

Avalon A1346 SHA-256 ASIC Miner

The Avalon A1346 is an ASIC mining system built for the SHA-256 algorithm used by Bitcoin. It delivers a nominal hashrate of 110 TH/s while drawing 3300 W of power. The unit requires a 220 V supply within a 176–264 V range and connects via Ethernet. It is intended for operators who can provide industrial-grade power and cooling.

Suitable for managed facilities, not home use

This miner suits facilities with 220 V three-phase infrastructure, dedicated ventilation and noise tolerance up to 75 dB. It is not appropriate for residential circuits, standard office wiring or environments where sound and heat cannot be exhausted. Buyers without proper electrical installation should look at lower-power alternatives.

Deciding spec: 3300 W power draw at 220 V

The single figure that determines suitability is the 3300 W power consumption at 220 V input. Your site must supply continuous 220 V within 176–264 V and handle the associated current and heat load. If that power budget is unavailable, the miner cannot operate reliably.

Kohokohdat

  • 110 TH/s hashrate for strong Bitcoin mining performance
  • 3300 W power draw at the wall for energy planning
  • 220 V input requirement protects the unit from damage
  • 75 dB noise level suits dedicated mining spaces
  • 8 kg weight on a 306 x 405 x 442 mm frame for rack mounting

Tekniset tiedot

Brandavalon
SeriesA1346
ModelA1346
TypeMining Barebone System
Crypto AlgorithmSHA-256
Compatible CurrencyBitcoin (BTC)
Mining HardwareASIC
Hashrate110TH/S
Power Consumption3300W

Kysymyksiä tästä tuotteesta

How do I confirm the Avalon A1346 is hashing at 110TH/s after I power it on?

Connect the miner to your network via Ethernet, open its web dashboard, and verify the real-time hashrate reads 110TH/s while power draw settles near 3300W and the temperature stays between 5 and 45 °C.

What comes in the box with the A1346 and what must I source separately?

The unit itself — a 12.8 kg barebone ASIC measuring 306 x 405 x 442 mm — is included; you must supply a 220 V power feed within the 176–264 V range, an Ethernet cable, and adequate cooling for 75 dB noise.

Which Avalon model should I choose if I need 110TH/s on SHA-256?

The A1346 is the only model in this listing delivering 110TH/s at 3300W; earlier A1246 and A1166 Pro units offer lower hashrates and are not equivalent.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.