Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Rectangular metal mining unit, matte grey finish, front grille and rear exhaust ports

AFRNDK

AFRNDK BM-N3 mining hardware 30TH/s 3300W

SKU CH-FN92-228EK MPN BM-N3

An Eaglesong ASIC miner delivering 30 TH/s at 3300 W with air cooling and Ethernet connectivity

  • TypeMining Machine/Miner
  • Crypto AlgorithmEaglesong
  • Mining HardwareASIC
  • Hashrate30TH/S
  • Power Consumption3300W
  • 30 TH/s Eaglesong hashrate for CKB mining
  • 3300 W power draw at the wall with ±5 % tolerance
  • Air-cooled design operates from 0 °C to 40 °C ambient
  • Compact 340 × 190 × 293 mm chassis weighs 12.2 kg
  • 180-day warranty from shipping date included

ASIC Miner for Eaglesong CKB

The AFRNDK BM-N3 is an air-cooled ASIC miner built for the Eaglesong algorithm used by Nervos CKB. It delivers a nominal hashrate of 30TH/s while drawing 3300W at the wall. The unit operates on AC input between 190V and 240V and connects to the network via Ethernet. It is intended for operators who want dedicated CKB mining hardware in a single rack-mountable box.

Step up from lower-output Eaglesong units

Replacing a GPU rig or an earlier-generation ASIC with this model raises hashrate to 30TH/s at a fixed 3300W power envelope. The jump is worth it when your electricity cost per kilowatt-hour makes the higher density profitable and when you can provide stable 220V supply. A Lite mode is supported for reduced draw, but the factory rating assumes 25°C ambient temperature.

Verify voltage, cooling and network before ordering

Confirm that your facility supplies 190V to 240V AC at 50Hz or 60Hz; incorrect voltage can damage the miner. Ensure the operating environment stays between 0°C and 40°C with enough airflow for 3300W of heat rejection. Check that an Ethernet port is available for the miner’s sole network connection and that rack or shelf space fits the 340mm × 190mm × 293mm chassis.

Kohokohdat

  • 30 TH/s Eaglesong hashrate for CKB mining
  • 3300 W power draw at the wall with ±5 % tolerance
  • Air-cooled design operates from 0 °C to 40 °C ambient
  • Compact 340 × 190 × 293 mm chassis weighs 12.2 kg
  • 180-day warranty from shipping date included

Tekniset tiedot

BrandiBelink
SeriesBM N3
ModelBM N3
TypeMining Machine/Miner
Crypto AlgorithmEaglesong
Mining HardwareASIC
Hashrate30TH/S
Power Consumption3300W

Kysymyksiä tästä tuotteesta

What input voltage does the unit require?

The miner requires a 220 V supply and accepts a range of 190 V to 240 V AC at 50 Hz or 60 Hz. Using the wrong voltage can damage the hardware.

How much space is needed for the miner itself?

The machine measures 340 mm long, 190 mm wide and 293 mm high, so allow at least that footprint plus room for airflow.

What are the power and hashrate figures at the wall?

Power draw is 3300 W ±5 % at the wall with 25 °C ambient temperature, and the hashrate is 30 TH/s ±5 % on the Eaglesong algorithm.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.