Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Compact silver mining barebone with front grille and rear ports

AFRNDK

AFRNDK Jasminer X4Q 1040MH/s 370W 40dB Mining Hardware

SKU CH-EJ49-DADGH

An ASIC miner for ETCHASH coins delivering 1040 MH/s at 370 W with a noise level of 40 dB

  • TypeMining Barebone System
  • Crypto AlgorithmETCHASH
  • Compatible CurrencyETC
  • Mining HardwareASIC
  • Hashrate1040MH/S
  • Noise level40dB
  • Mines ETC with 1040 MH/s ETCHASH performance
  • Low 370 W draw keeps electricity costs down
  • Quiet 40 dB operation suits home or IDC rooms
  • Compact barebone design with built-in fan saves rack space
  • 5 GB DAG memory enables mining ETC and compatible coins

ETC ASIC Miner for IDC and Home Use

The AFRNDK Jasminer X4Q is an ASIC mining barebone system built for the ETCHASH algorithm. It delivers a hashrate of 1040MH/s while drawing 370W of power. The unit operates at a noise level of 40dB, making it suitable for both IDC rooms and home environments. It supports a range of coins including ETC, ETP, EXP and others.

Verify Power and Thermal Limits Before Ordering

Confirm your electrical circuit can sustain 370W of continuous load with appropriate wiring and connectors. Ensure the operating environment stays within the 0-40 working temperature range for stable operation. The device is supplied as a second-used unit that has been tested and is working well. Check that your network infrastructure provides a reliable connection for pool mining.

Compact Barebone with Built-In Cooling

The miner integrates its own fan, removing the need for external active cooling solutions. Its compact form factor allows dense deployment in rack or shelf configurations. On-board 5GB DAG memory handles the current ETCHASH dataset without additional hardware. The low power draw relative to hashrate frees up headroom on power distribution units for other equipment.

Kohokohdat

  • Mines ETC with 1040 MH/s ETCHASH performance
  • Low 370 W draw keeps electricity costs down
  • Quiet 40 dB operation suits home or IDC rooms
  • Compact barebone design with built-in fan saves rack space
  • 5 GB DAG memory enables mining ETC and compatible coins

Tekniset tiedot

BrandJasminer
SeriesX4
ModelX4Q
TypeMining Barebone System
Crypto AlgorithmETCHASH
Compatible CurrencyETC
Mining HardwareASIC
Hashrate1040MH/S
Noise level40dB
Power Consumption370W

Kysymyksiä tästä tuotteesta

What power supply capacity is needed for the 370 W draw?

Use a PSU rated above 370 W with the required 6-pin connectors to handle the load and the ±10 % variance.

Can this unit mine Ethereum Classic out of the box?

Yes, the 5 GB DAG memory supports ETCHASH so ETC mining works immediately after pool configuration.

Is the 40 dB noise level suitable for a home office?

At under 40 dB the miner runs at a quiet library level, making it practical for home or IDC room use.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.