Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Rectangular metal mining unit, matte grey finish, four front fans, RJ45 port visible, 400 by 195.5 by 290 millimetres

AFRNDK

AFRNDK S19 86Th/s SHA-256 mining hardware

SKU CH-HARZ-BYYMX MPN S19

SHA-256 ASIC miner delivering 86Th/s at 34.5J/Th with 2967W draw and 76dB noise over RJ45 Ethernet

  • Crypto AlgorithmSHA-256
  • Compatible CurrencyBTC
  • Hashrate86T
  • Noise level76dB
  • Fan4
  • 86 TH/s SHA-256 hashrate for Bitcoin mining
  • 5 J/TH power efficiency reduces electricity cost
  • 2967 W power draw at 220 V input
  • 76 dB noise level with four cooling fans
  • RJ45 Ethernet 10/100M network connection

What this miner does

The AFRNDK S19 is a SHA-256 ASIC built for Bitcoin and Bitcoin Cash mining. It delivers a hashrate of 86Th/s while drawing 2967W at the wall. The unit ships with an integrated power supply and connects to the network through a 10/100M RJ45 port. Noise during operation reaches 76dB.

Who should buy it and who should not

This hardware suits operators with access to 220V mains power and a location that tolerates 76dB continuous sound. Sites limited to lower mains voltage or noise-sensitive environments should look elsewhere. The four-fan cooling system demands adequate airflow and rack space measuring 400mm by 195.5mm by 290mm.

The spec that decides fit

Power efficiency is rated at 34.5J/Th, which directly determines daily electricity cost per terahash. At 2967W total draw the miner requires a 220V circuit capable of sustaining that load without derating. If your facility cannot meet the voltage or power density requirement the S19 will not operate reliably.

Kohokohdat

  • 86 TH/s SHA-256 hashrate for Bitcoin mining
  • 5 J/TH power efficiency reduces electricity cost
  • 2967 W power draw at 220 V input
  • 76 dB noise level with four cooling fans
  • RJ45 Ethernet 10/100M network connection

Tekniset tiedot

BrandANTMINER
SeriesS19
ModelS19
Crypto AlgorithmSHA-256
Compatible CurrencyBTC
Hashrate86T
Noise level76dB
Fan4

Kysymyksiä tästä tuotteesta

What power circuit must I already have for the S19 to run?

The S19 requires a 220V supply and draws 2967W, so a dedicated 220V circuit rated for at least 16A is needed before installation.

Will the S19’s RJ45 10/100M port work with my older 100M switch?

Yes, the Ethernet interface is 10/100M and will link at 100M with an older switch, which is sufficient for stratum traffic.

How can I confirm the S19 is hashing at the rated 86Th/s after setup?

Check the miner’s web dashboard or pool worker page; a sustained rate near 86Th/s with 34.5J/Th efficiency shows it is operating as specified.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.