Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Rectangular metal mining unit, silver finish, four front fans, RJ45 port visible

AFRNDK

AFRNDK S19K PRO 115TH/s SHA256 ASIC mining hardware

SKU CH-8XXS-QVRTG

SHA-256 ASIC miner delivering 115 TH/s at 2760 W with four fans at 76 dB, 220 V input, RJ45 Ethernet, 0-40 °C operating range, 570×316×430 mm, 15.2 kg

  • TypeMining Barebone System
  • Crypto AlgorithmSHA 256
  • Compatible CurrencyBitcoin (BTC)
  • Mining HardwareASIC
  • Hashrate115T
  • Noise level76dB
  • Delivers 115 TH/s hashrate for SHA-256 mining
  • Consumes 2760 W at the wall for efficient operation
  • Runs at 76 dB with four integrated cooling fans
  • Requires 220 V input to prevent hardware damage
  • Compact 570 x 316 x 430 mm frame weighs 15.2 kg

AFRNDK S19K PRO 115TH/s SHA256 ASIC Miner

The AFRNDK S19K PRO is an ASIC miner built for the SHA256 algorithm and targets Bitcoin (BTC) mining. It delivers a rated hashrate of 115TH/s with a tolerance of +/- 3%. The unit draws 2760W of power and requires a 220V input; incorrect voltage can damage the hardware. Four integrated fans produce a noise level of 76dB during operation.

Upgrade from older SHA256 ASICs

This model replaces earlier SHA256 ASIC miners such as the S19 PRO, S17 Pro and T17 by offering a higher hashrate at 115TH/s. The jump is worth it when the increased throughput improves mining economics enough to offset the 2760W power draw and the 220V supply requirement. Operators must also accommodate the physical footprint of 570mm by 316mm by 430mm and a net weight of 15.2KG.

Suited for dedicated Bitcoin mining facilities

The miner suits facilities that can provide stable 220V power, adequate cooling for 76dB noise and space for the stated dimensions. It connects via RJ45 Ethernet at 10/100M and operates in ambient temperatures from 0 to 40 degrees Celsius. Operators without 220V infrastructure, noise-tolerant environments or rack space for the 570mm length should consider alternative hardware.

Kohokohdat

  • Delivers 115 TH/s hashrate for SHA-256 mining
  • Consumes 2760 W at the wall for efficient operation
  • Runs at 76 dB with four integrated cooling fans
  • Requires 220 V input to prevent hardware damage
  • Compact 570 x 316 x 430 mm frame weighs 15.2 kg

Tekniset tiedot

BrandANTMINER
SeriesS19K PRO
ModelS19K PRO
TypeMining Barebone System
Crypto AlgorithmSHA 256
Compatible CurrencyBitcoin (BTC)
Mining HardwareASIC
Hashrate115T
Noise level76dB
Fan4
Power Consumption2760W

Kysymyksiä tästä tuotteesta

What are the exact dimensions and weight of the S19K PRO unit?

The miner measures 570mm in length, 316mm in width and 430mm in height, with a net weight of 15.2KG.

What is the required input voltage and network connection for initial setup?

Connect the unit to a 220V supply and link it via the RJ45 Ethernet 10/100M port; incorrect voltage can damage the hardware.

How often should the four cooling fans be inspected or replaced?

Check fan operation regularly, especially when ambient temperatures approach 40°, and replace any fan that shows reduced airflow or abnormal noise.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.