Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Rectangular metal ASIC miner with Ethernet port and cooling vents

AFRNDK

AFRNDK V2H ASIC mining hardware

SKU CH-HA54-3HTDK MPN V2H

An ASIC miner for Ethereum Classic delivers 3.4Gh/s at 475W with 55dB noise and operates between 5 and 40°C

  • TypeMining Machine/Miner
  • Crypto AlgorithmEtHash Algorithm
  • Compatible CurrencyEthereum Classic (ETC)
  • Mining HardwareASIC
  • Hashrate3400MH/S
  • Power Consumption475W
  • Efficient EtHash mining at 3.4 Gh/s drawing only 475 W
  • Quiet 55 dB operation keeps home or office environments comfortable
  • Broad 5 °C to 40 °C range ensures stable output in varied climates
  • Wide 10 % to 90 % humidity tolerance protects hardware in damp conditions
  • Ready-to-run unit ships new from the November 2024 release

ETC ASIC Miner for EtHash

The AFRNDK V2H is an ASIC mining machine built for the EtHash algorithm and the Ethereum Classic network. It provides a maximum hashrate of 3400MH/S from a 475W power draw. The unit is intended for operators who mine ETC as their primary coin.

Thermals Noise and Power Envelope

Rated noise output is 55db during normal operation. The hardware runs within an ambient temperature range of 5 to 40 °C and tolerates humidity between 10 and 90 %. Power consumption stays at 475W while the miner maintains its rated hashrate.

Ethernet Interface and Management

A wired Ethernet connection handles pool communication and remote monitoring. The network link lets operators adjust settings, track performance and apply firmware updates without local access. No additional bundled software or accessories are described in the specifications.

Kohokohdat

  • Efficient EtHash mining at 3.4 Gh/s drawing only 475 W
  • Quiet 55 dB operation keeps home or office environments comfortable
  • Broad 5 °C to 40 °C range ensures stable output in varied climates
  • Wide 10 % to 90 % humidity tolerance protects hardware in damp conditions
  • Ready-to-run unit ships new from the November 2024 release

Tekniset tiedot

BrandiPOLLO
SeriesV2H
ModelV2H
TypeMining Machine/Miner
Crypto AlgorithmEtHash Algorithm
Compatible CurrencyEthereum Classic (ETC)
Mining HardwareASIC
Hashrate3400MH/S
Power Consumption475W

Kysymyksiä tästä tuotteesta

How do I connect the iPollo V2H to my network and what step is often missed?

Connect the Ethernet cable to your router or switch then power on the unit. The step often missed is confirming the miner receives an IP address via DHCP before trying to reach the web interface.

Which component will need replacement first when the miner runs continuously?

The cooling fans are the primary wear item; continuous operation at 55 dB means bearing life will eventually limit airflow and require a fan swap.

What environmental limit will throttle the hashrate first during sustained operation?

The 40 °C upper ambient temperature limit is reached before the 90 % humidity ceiling so heat is the first factor that can reduce the 3.4 Gh/s output.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.