Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Six blue USB 3.0 cables connect small green riser cards with gold PCI-E 16x slots to matching 1x boards

AFRNDK

AFRNDK VER009S PCI-E 1x to 16x Riser Kit 6pcs 60cm USB 3.0 SATA Power

SKU CH-SDQD-B9RSQ

Six PCIe x1 to x16 riser boards with 60 cm USB 3.0 cables and SATA power adapters, each fitted with four solid capacitors and dual LED status lights

  • 60 cm USB 3.0 cable gives flexible GPU placement
  • Four FP solid capacitors stabilise graphics power delivery
  • Gold-plated PCIe contacts maintain reliable connectivity over time
  • Dual LED indicators show 3.3 V and 12 V rail status
  • SATA 15-pin to 6-pin cable eases motherboard power load

PCI-E 1x to 16x Riser Kit

This kit provides six PCI-E 1x to 16x riser cards with 60cm USB 3.0 cables for cryptocurrency mining rigs. Each riser uses a 1-slot board measuring 122x45x13mm and includes gold-plated contacts for reliable connectivity. The package contains six adapters, six riser cards, six USB 3.0 cables, and six SATA 15pin to 6pin power cables.

Built for Multi-GPU Mining Farms

Designed for builders assembling Bitcoin mining systems that need multiple graphics cards spaced away from the motherboard. The integrated 4pin and dual 6pin power ports plus SATA 15pin adapters reduce load on the motherboard. Not suited for compact cases lacking clearance for 60cm cables or for GPUs drawing above 100W where the supplier recommends a different riser model.

Stable Power Delivery up to 100W per Card

Four solid capacitors and an automatic anti-jam circuit help keep the graphics power supply stable at 3.3V and 12V, indicated by dual LEDs. The SATA 15pin to 6pin cables add flexible power options for standard mining GPUs. Headroom ends around the 100W mark; higher-power cards should use the recommended alternative riser.

Kohokohdat

  • 60 cm USB 3.0 cable gives flexible GPU placement
  • Four FP solid capacitors stabilise graphics power delivery
  • Gold-plated PCIe contacts maintain reliable connectivity over time
  • Dual LED indicators show 3.3 V and 12 V rail status
  • SATA 15-pin to 6-pin cable eases motherboard power load

Tekniset tiedot

Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.

Kysymyksiä tästä tuotteesta

Will this riser kit power a GPU that draws more than 100W?

The supplier recommends the Riser012MAX model for graphics cards above 100W. This kit includes SATA 15pin to 6pin power cables and four solid capacitors for stable delivery up to that level.

What motherboard slots are required for the six riser cards?

Each riser card plugs into a single PCI-E 1x slot. You need six available 1x slots or compatible 4x, 8x, 16x slots wired for 1x operation.

How much clearance does the 122x45mm board need inside the case?

The adapter board measures 122mm long by 45mm wide and 13mm tall. Allow extra space for the 60cm USB 3.0 cable bend radius and the side clip that secures the graphics card.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.