Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Rectangular metal mining unit with dual fans and Ethernet port

AFRNDK

AFRNDK Whatsminer M50 114T SHA-256 114 TH/s 3306W mining hardware

SKU CH-53P9-ZQFWQ

SHA-256 ASIC miner delivering 114 TH/s at 29 J/T efficiency with 3306 W power draw and 75 dB noise

  • Crypto AlgorithmSHA-256
  • Compatible CurrencyBitcoin (BTC)
  • Hashrate114T
  • Network ConnectionEthernet
  • Noise level75dB
  • Fan2
  • 114 TH/s peak hashrate for SHA-256 mining
  • 29 J/T efficiency keeps electricity costs lower
  • 3306 W power draw at full load
  • 75 dB noise level with dual-fan cooling
  • Operates on 220–240 V supply in 5–45 °C range

AFRNDK Whatsminer M50 114T SHA-256 Miner

The AFRNDK Whatsminer M50 114T is a SHA-256 ASIC miner built for Bitcoin mining. It delivers a maximum hashrate of 114 TH/s with a power efficiency of 29 J/T. The unit ships with an included power supply and operates on a 220-240V electrical supply. It is intended for operators running dedicated mining infrastructure.

Build Quality and Connectivity

The chassis measures 125 x 225 x 425mm and houses two cooling fans. A single Ethernet port provides the network link for pool communication and remote management. The miner is rated for an operating temperature range of 5 to 45 °C and a humidity range of 5 to 95 %. Correct voltage is critical; the supplier notes that wrong voltage may cause the unit to stop working.

Thermals, Noise and Power Draw

Two fans move air through the 5nm chip array to maintain thermal limits under continuous load. Acoustic output reaches 75 dB during normal operation. The system draws 3306W at the wall while producing the rated 114 TH/s. Efficiency holds at 29 J/T across the operating envelope.

Kohokohdat

  • 114 TH/s peak hashrate for SHA-256 mining
  • 29 J/T efficiency keeps electricity costs lower
  • 3306 W power draw at full load
  • 75 dB noise level with dual-fan cooling
  • Operates on 220–240 V supply in 5–45 °C range

Tekniset tiedot

BrandWHATSMINER
SeriesM50
ModelM50
Crypto AlgorithmSHA-256
Compatible CurrencyBitcoin (BTC)
Hashrate114T
Network ConnectionEthernet
Noise level75dB
Fan2
Power Consumption3306W
Power Efficiency29 J/T

Kysymyksiä tästä tuotteesta

What Ethernet speed does the Whatsminer M50 support for pool connectivity?

The Whatsminer M50 connects to mining pools through a standard Ethernet interface. A stable wired link is required to sustain the 114 TH/s hashrate without stale shares.

What are the exact dimensions and voltage range needed to install this miner?

The unit measures 125 mm by 225 mm by 425 mm and must run on a 220-240 V supply. Operating outside this range will prevent the miner from starting.

What is the correct power-up sequence to avoid tripping the PSU on the M50?

Connect all power cables to the miner first, then switch on the 220-240 V mains. Powering the PSU before the cables are seated can trigger over-current protection and stop the unit from booting.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.