Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Rectangular silver metal mining unit with dual fans and Ethernet port

AFRNDK

AFRNDK Whatsminer M60S+ 200TH/s 3400W mining hardware

SKU CH-2AJ4-ZRMQ0

SHA-256 ASIC miner delivers 200 TH/s at 3400 W with Ethernet connectivity and 75 dB noise

  • TypeMining Machine/Miner
  • Crypto AlgorithmSHA-256
  • Compatible CurrencyBitcoin (BTC)
  • Mining HardwareASIC
  • Hashrate200TH/S
  • Network ConnectionEthernet
  • Delivers 200 TH/s SHA-256 hashrate for Bitcoin mining
  • Draws 3400 W power with 220 V input requirement
  • Operates at 75 dB noise with dual-fan cooling
  • Compact 430 x 155 x 226 mm frame fits dense racks
  • Runs reliably from -5 °C to 35 °C ambient temperature

Purpose-built Bitcoin miner

The AFRNDK Whatsminer M60S+ is an ASIC machine designed for SHA-256 mining of Bitcoin. It delivers a hashrate of 200TH/s while drawing 3400W of power. The unit targets operators who run dedicated mining infrastructure and can provide the required 220V supply. Release timing was February 2024.

Physical build and connectivity

The chassis measures 430 x 155 x 226mm and weighs 13500g with two integrated fans. Noise output is specified at 75dB in the technical data and 80dB in the supplier summary, so expect loud operation in a rack or shelf. Network access is provided by a single Ethernet port. The operating window spans -5 to 35°C and 5 to 95% humidity.

Included accessories and software

The box contains the miner and essential cabling for power and network connection. No separate controller or software licence is bundled; management is handled through the onboard web interface once the unit receives an IP address. Firmware updates are supplied by MicroBT and applied over the same Ethernet link.

Kohokohdat

  • Delivers 200 TH/s SHA-256 hashrate for Bitcoin mining
  • Draws 3400 W power with 220 V input requirement
  • Operates at 75 dB noise with dual-fan cooling
  • Compact 430 x 155 x 226 mm frame fits dense racks
  • Runs reliably from -5 °C to 35 °C ambient temperature

Tekniset tiedot

BrandWhatsminer
SeriesM60S+
ModelM60S+
TypeMining Machine/Miner
Crypto AlgorithmSHA-256
Compatible CurrencyBitcoin (BTC)
Mining HardwareASIC
Hashrate200TH/S
Network ConnectionEthernet
Noise level80dB
Power Consumption3400W

Kysymyksiä tästä tuotteesta

What network connection does the M60S+ use and what speed does it cap at in practice?

The M60S+ connects via Ethernet; the SHA-256 ASIC runs at 200 TH/s and draws 3400 W, so the link only needs to carry stratum traffic, not the hash rate itself.

What are the exact dimensions and weight I must accommodate for the M60S+?

The unit measures 430 x 155 x 226 mm and weighs 13500 g; allow clearance for two fans and the 220 V power input.

How is the M60S+ set up and which step is most often missed?

Connect Ethernet, apply 220 V power, then configure the pool in the web UI; the step most often missed is verifying the 220 V supply before powering on.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.