Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

ALAMENGDA

ALAMENGDA Open Frame Test Bench ATX PC Case

SKU CH-CXG5-KBJRZ

Open-frame test bench accepts ATX, Micro-ATX and ITX boards up to 305×245 mm, fits one 3.5″ and one 2.5″ drive, and imposes no graphics-card length limit

  • TypeATX Open Frame Chassis
  • ColorBlack
  • Case Materialhigh-quality 0.8mm SPCC steel plate, the surface is baked wi
  • With Power SupplyNo
  • Power Supply MountedBottom
  • Side Panelwithout Side Window

Options Mid Tower

  • Open frame design gives unrestricted GPU length and width for any graphics card
  • Supports ATX, Micro ATX and ITX motherboards up to 305 by 245 mm
  • Sturdy 0.8 mm SPCC steel with baked black sand-grain finish
  • Bottom-mounted standard ATX power supply up to 250 mm long
  • Fits one 3.5 inch drive and one 2.5 inch drive

Open Frame ATX Test Bench

The ALAMENGDA open frame chassis uses .8 mm SPCC steel with a baked black sand-grain finish. It accepts ATX, Micro ATX and ITX motherboards up to 305 by 245 mm and a standard ATX power supply. One 3.5 inch bay and one 2.5 inch bay are provided for storage. The frame weighs 1.0 kg and measures 440 by 265 by 128 mm without the power supply fitted.

Unrestricted GPU And Dual Drive Support

Graphics card length and width are not limited by the frame, so any card the motherboard can physically accommodate will fit. The single 3.5 inch and 2.5 inch bays let builders install one hard drive and one SSD for a compact test or server configuration. No side panels or windows are included, keeping airflow completely open around the components.

Fixed PSU Depth And EATX Exclusion

The power supply mounting area follows the standard ATX reference size of 150 by 86 by 140 to 250 mm, so longer units will not fit. Motherboards larger than 305 by 245 mm such as EATX are not supported on this model. Builders needing more than one drive or a wider board must choose a different chassis.

Kohokohdat

  • Open frame design gives unrestricted GPU length and width for any graphics card
  • Supports ATX, Micro ATX and ITX motherboards up to 305 by 245 mm
  • Sturdy 0.8 mm SPCC steel with baked black sand-grain finish
  • Bottom-mounted standard ATX power supply up to 250 mm long
  • Fits one 3.5 inch drive and one 2.5 inch drive

Tekniset tiedot

BrandALAMENGDA
TypeATX Open Frame Chassis
ColorBlack
Case Materialhigh-quality 0.8mm SPCC steel plate, the surface is baked with black sand grain paint
With Power SupplyNo
Power Supply MountedBottom
Side Panelwithout Side Window
Internal 3.5" Drive Bays1
Internal 2.5" Drive Bays1
Max GPU Lengththe length and width of graphics cards are not limited
Max PSU Lengthstandard ATX power supply

Tämän mallin muut versiot

2 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will the 0.8 mm SPCC steel frame need any upkeep over time?

The black sand-grain paint finish resists corrosion, so the frame itself requires no scheduled maintenance.

What is the first dimensional limit reached when installing a long graphics card?

Card length and width are unrestricted; the motherboard's PCIe slot spacing is the practical limit.

How much heat builds up inside the open frame when the system runs continuously?

With no side panels, airflow is unrestricted, so component heat dissipates directly into the room without case-internal buildup.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.