Alphacool G1/4 13mm HardTube Compression Fitting Chrome 62776
- Fittings
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Alphacool
Connects a fitting at a 90° revolvable angle to a G1/4 thread for flexible custom-loop routing
Color Black
The Alphacool 90° Revolvable Angled Adaptor Deep Black 17057 connects a fitting of your choice at a right angle to a G1/4" thread. It is built for custom water-cooling builders who need flexible routing in tight spaces. The revolvable design lets you orient the connection without stress on tubing or other components. Model 64231 carries the same specification under a different part number.
In the box you receive one angled adaptor with a G1/4 outer thread and a G1/4 inner thread. The part adds no extra tubing, coolant or tools; it simply redirects an existing fitting by 90 degrees while allowing free rotation. This lets you align ports cleanly when standard straight fittings would clash with neighbouring hardware or case panels. No additional accessories or software are bundled with the adaptor.
The adaptor uses a brass body treated with a chromatising process that bonds the Deep Black colour to the metal, preventing peeling of the chrome layer over time. Alphacool highlights the inner diameter as a high-flow design, so the fitting does not restrict coolant movement. G1/4 threads are the standard for most custom-loop components, ensuring broad compatibility with existing blocks, radiators and reservoirs. Builders who need multiple angles or different thread sizes will require additional adaptors.
| Brand | Alphacool |
|---|---|
| Model | 64231 |
| Color | Black |
| Features | This angled adaptor can be used to connect a fitting of your choice at a 90° angle and revolvable to a G1/4“ thread. |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The brass body and permanent chromatised finish resist corrosion, so the G1/4 threads should not require re-taping or replacement under normal use.
The adaptor's inner diameter is designed for high flow, so the 90° bend itself is the primary restriction rather than the fitting bore.
The static seal adds no moving parts, so it produces no additional noise or heat beyond the fluid passing through the 90° path.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?